Execution Errors; Sd Card Errors - CTI Janus 2500C-J Series Installation And Operation Manual

Execution Errors

Error Description
Code
310 System Exception Error
(Detected after CPU reset
following Segmentation
Fault or Firmware Error)
320 System Watchdog Timeout
(Detected after CPU reset
following Segmentation
Fault or Firmware Error)
330 Program Logic Error

SD Card Errors

Error Description
Code
350 Internal SD Card Disk Full
(no further writes to internal
SD card)
355 Internal SD Card Free Space
Limit
(disk > 90% full)
360 Internal SD Card Free Space
Warning
(disk > 80% full)
370 Front Panel SD Card Not
Accessible (Missing,
Incompatible, Unformatted
or Write-Protected)
64
Priority Operation
6 System restarts.
Controller remains
stopped after restart.
7 System restarts.
Controller remains
stopped after restart.
7 Controller enters ERROR
state (Logic programs and
fieldbus protocols are
stopped).
Priority Operation
15 Controller continues to
run, but database updates,
user file functions, and
program downloads are
prohibited.
16 Controller continues to
run, but all user file access
functions are disabled
(should return errors when
called).
17 Controller continues to run
normally.
16 Controller continues to run
normally
CTI Janus Programmable Automation Controller IOG
Error Recovery
Connect Workbench and transfer
to RUN or use C E
LEAR XCEPTION
button to restart CPU.
Contact CTI Support.
Connect Workbench and transfer
to RUN or use Reset button to
restart CPU.
Contact CTI Support.
This condition most likely caused
by 'Infinite Logic Loop' or 'Bad
Array Index'. Connect Workbench
to correct problem and transfer to
RUN or use 'Clear Exception'
button to restart CPU.
Error Recovery
Use Web Server
'SD Card File Management' page
to transfer or delete user files.
Use Web Server
'SD Card File Management' page
to transfer or delete user files
Use Web Server
'SD Card File Management' page
to transfer or delete user files
Cancel function that is using
Front Panel SD Card, or correct
problem with SD card.