Web Server IP Address Configuration
Once your PC and the controller are on the same subnet, you can configure the IP address via the embedded web
server.
•
Access the embedded web server by typing the IP address of the controller into the URL box of your
browser and pressing the E
•
Navigate to the C
•
Ensure the S
TATIC
•
For the Primary IP Subnet configuration, enter the parameters for the IPV4 Address, Subnet Mask, and
Default Gateway
•
Click on the A
PPLY
After the update is complete, the connection will be lost. To re-access the server, you will need to enter the new IP
address in the browser URL box.
For additional details regarding network settings, see
Other Controller Configuration Options
You may also use the embedded web server to configure other controller characteristics, including:
•
Startup and Alphanumeric Display Options - See
•
Authentication and Encryption Options – See
•
Clock Setting or Time Synchronization Method – See
28
key.
NTER
/N
S
ONFIGURATION
ETWORK
button is selected.
button to accept the entries and initiate the update.
page.
ETTINGS
Section
4.2.
Section 4.1 General
Section 4.3 Security
Section 4.4 Clock
CTI Janus Programmable Automation Controller IOG
Settings.
Settings,
Settings.
Need help?
Do you have a question about the Janus CTI 2500C-J Series and is the answer not in the manual?