8.3.6 Firmware Update
This page provides a method to initiate a Remote Firmware Update for the Janus controller. For more details, see
Section
6.3.
•
[R
] pushbutton is used to recheck the controller C operational status.
EFRESH
•
[B
] pushbutton displays a File Explorer window when pressed. This allows navigation through
ROWSE
PC/Network drives to select the Firmware Update file to download..
•
[U
F
PDATE
IRMWARE
position, Warning Acknowledgement checkbox, and PLC operational state) must be met before firmware
update process will start.
NOTE: The Remote Firmware Update procedure can be cancelled any time prior to pressing the [U
F
] pushbutton by selecting a different web page or closing the browser window. Once the button is
IRMWARE
pressed, firmware update will continue until successful completion or error.
•
[S
] window that provides information on the current state of the firmware update process.
TATUS
8.3.7 Product Reset
This page provides a method to remotely the reset of the Janus controller. Remote reset is allowed only when
module Switch 5 is in the C
•
Clear Exception
•
Reset Configuration Settings
•
Restore Factory Defaults
See
Section 5.3
for description of reset options.
NOTE: The connection to the PLC web server will be lost after any of the above actions are taken. Any action other
than 'Clear Exception' will force the PLC to lose its IP address.
56
] button initiates the firmware update process when pressed. All interlocks (User Switch 1
position. The following resets are allowed:
LOSED
CTI Janus Programmable Automation Controller IOG
PDATE
Need help?
Do you have a question about the Janus CTI 2500C-J Series and is the answer not in the manual?