Application Information; Configuration; General Settings - CTI Janus 2500C-J Series Installation And Operation Manual

8.2 Application Information

This page contains information about the current application.
•
Project Name/Compile Version
•
Project Compile Timestamp
•
CTI Workbench Compiler Version
•
Session Number: Session ID of the current session
•
Current Operational Mode: ( APPLICATION STOP / LOGIC STOP/ RUN / ERROR )
•
Active Error Codes: See
•
System Resources: Displays memory, file and socket utilization for the operating system.
•
Product Resources: Displays memory, file, and socket utilization for the product.
•
Components Configured: Indicates configuration status of fieldbus drivers and other facilities.
•
Component Errors: Indicates components that are in an error state.
•
Non-configurable System Element Errors: Indicates elements that are in an error state.
•
Locked Variables: Lists variables that are locked (forced).

8.3 Configuration

8.3.1 General Settings

This page contains settings that apply to the general operation of the controller.
•
Module Identifier - Optional 16-character text field used to identify the controller
•
Operation following Module Reset
o
Restore Last State (Default)
o
Application Stop
o
Auto-Run Cold Start,
o
Auto-Run Warm Start
o
Auto-Run Hot Start
•
Operation following Project Download from Janus Workbench
o
Application Stop - Logic programs and fieldbuses are stopped
o
Logic Stop – Logic programs stopped/ Fieldbuses execute (Default)
o
Run – Logic programs and fieldbuses execute
•
Front Panel Display Items
o
Display Primary Network IP on Front Panel
o
Display Subnet IP's on Front Panel (displays IP address of configured alternate subnets)
The new parameters go into effect immediately after clicking the A
NOTE: If both display options are disabled, the front panel alphanumeric display will be blank when no error
conditions are active.
52
Error Descriptions and Status web page description for details.
button and confirming the action.
PPLY
CTI Janus Programmable Automation Controller IOG