Table of Contents
Advertisement
■
OSD
- Used to change options in on-screen display
Language
English
OSD Blend
used to change the transparency level of OSD [ 0 (opaque) ~ 10 (transparent) ]
OSD Position
used to change the position of OSD
[ Left/Top, Center/Top, Right/Top, Left/Middle, Center/Middle, Right/Middle, Left/Bottom,
Center/Bottom, Right/Bottom ]
■
Load System Default
- Used to reset the monitor to factory default setting
[ No, Yes]
* except for changes in color temperature (refer to Color Temp in Video section)
■
Temperature Ctrl
- Used to control temperature of the monitor
Hysteresis
used to control both shutdown ref and auto fan ref together [ 2.0℃ min ~ 6.0℃ max ]
Shutdown Ref
panel shutdown temperature setting [ 70℃ min ~ 90℃ max ]
Auto Fan Ref
temperature setting to turn on/off fan [ 40℃ min ~ 60℃ max ]
Fan On/Off
used to turn on/off fan function [ Auto, Off, On ]
Fan Speed
used to set fan speed [auto, slow, normal, fast]
Temperature
to check internal temperature of the monitor
■
Bklight Dimming
- Used to control backlight brightness control [ 0min ~ 100max ]
■
Misc
- Used to apply changes to below
Background Gray
Gamma Correction
Gamma Curve
Key Brightness
Front Dial Lock
Power Saving
Setting
▶ Setting
▶ OSD
Main
▶ Setting
▶ Load Sys Default
Main
▶ Setting
▶ Temperature Ctrl
Main
▶ Setting
▶ Bklight Dimming
Main
▶ Setting
▶ Misc
Main
gray level in blank section of source [ 0min ~ 7max ]
used to activate gamma correction on the screen [ On, Off]
*It takes time to change the mode depending on source, screen size, etc.
when gamma correction is ON, users can change gamma level [ 1.0 ~ 3.0 ]
used to control backlight of 14 white keys on the front
used to lock bright, contrast, and chroma knob on the front
power saving mode among off, DPMS, and convertor
15
Advertisement
Table of Contents
