A/V Scope; Scope Position; Waveform Enable; Waveform Source - Ikegami HLE-1853G Operation Manual

■

Scope Position

Main
- Used to change the position of scopes
[ Right/Bottom, Right/Top, Left/Bottom, Left Top ]
■

Waveform Enable

- Used to turn on waveform on the screen
[ On, Off ]
■

Waveform Source

- Users can choose to display scopes of their needs
[ LUMA, Cb, Cr. LUMA/Cb/Cr ]
LUMA Cb
■

Vector Enable

- Used to turn on vector scope on the screen
[ On, Off ]
Vector
■

Audio Level Meter

- Used to turn on 16 channel audio level meter on top of the screen
[ On, Off ]
■
Scope Blend
- Used to control transparency level of scopes
[ On, Off ]
- When OSD is on and overlaps with scopes, scope blend automatically turns on even if it is off. When users exit
OSD, scope blend option goes back to user's original setting
14

A/V Scope

▶ A/V Scope ▶
Scope Position
▶ A/V Scope ▶
Main Waveform Enable
▶ A/V Scope ▶
Main Waveform Source
Cr
▶ A/V Scope ▶
Main Vector Enable
▶ A/V Scope ▶
Main Audio Level Meter
▶ A/V Scope ▶
Main Scope Blend
L/T
L/B
R/T
R/B