■
First Steps
When the monitor is powered on and connected to your source,
1
Selecting Input
2
Menu Control
- Press the main jog on the front of the monitor for 2 seconds to enter or exit the menu
- Turn the jog to move around the menu
- Click the jog to make your selection
- Main jog allows users to move one step at a time. If you wish to move back to previous step in the menu, press
the jog for two seconds. If you want to exit the menu and restart, press exit button depending on where you are in
menu tree
3
Function key
HLE-1853G
F1
UMD Type
F3
Waveform
F5
Blue/Mono
F7
SDI Output
- Users can program 8 function buttons on the front by
▶
MENU
- All features in the monitor can be programmed in one of these keys
Initial Setup
- To select your source, please press SOURCE button
- Turn the main jog to make your selection, and click the jog to select
- Factory default is SDI. Please skip this step if you are connected to SDI source
Factory default setting for programmable keys on the front of the monitor
▶
Function Key
Function Key #
F2
Marker
F4
Vectorscope
F6
H/V Delay
F8
HDMI Output
7