Instructions – 40040 * PLEASE READ ALL INSTRUCTIONS AND WARNINGS PRIOR TO ASSEMBLING, INSTALLING, AND USING THIS PRODUCT. * Warning Always check for wires, fuel tanks and lines, brake lines and other important vehicle functionality items prior to drilling and installing all products.
Instructions – 40040 Step 1 – Determine Location Of Door Kit Decide where you want the door kit to be installed. Be sure there is the correct spacing between shelves. The bottom shelf of the desired opening must have the shelf lip facing downward.
Instructions – 40040 Step 3 – Determine Locking Door Stop Orientation Locate the shelf that is directly above the shelf used in the previous step. Determine if it is an upward or downward facing shelf lip. This will determine orientation of door stop.
Page 6
Instructions – 40040 Repeat 5 more times along shelf and locking door stop. Insert rubber bumpers where they will encounter the door. TIGHTEN ALL PREVIOUS BOLTS. YOUR INSTALLATION IS NOW COMPLETE. For Technical Support Call: 800-343-7486, Monday-Friday, 7AM - 4 PM (PST)