Advertisement
Device Name
Project Configuration
8D ATS
■Involved □Not involved
UPS5000-E
■Involved □Not involved
SmartLi
■Involved □Not involved
MCCB
■Involved □Not involved
Note: The following device parameters are not all parameters of the devices. Only the parameters that need to be set for the project are listed. Default values will be used for the other
parameters so they do not need to be set. To view other device parameters, see the user manual for the corresponding device.
If voltage/frequency settings for power distribution devices are involved, adjust the voltage and frequency settings based on the local voltage system and check whether the voltage
thresholds and frequency hysteresis meet setting requirements before first operation.
Quantity
Power Distribution Device Name
2
MDB-A/MDB-B
4
ME UPS-A/ME UPS-B/IT UPS-A/IT UPS-B
ME UPS BAT-A/ME UPS BAT-B/IT UPS BAT-A/IT
4
MDB-A 2QF3/MDB-A 2QF4/MDB-B 2QF3/MDB-B
8
2QF4/GIU-DH-A1 QF/GIU-DH-A2 QF/GIU-DH-B1
QF/GIU-DH-B2 QF
Remarks
UPS BAT-B
Pyromagnetic MCCB; this part is used for setting
parameters in the assembly factory. It is not
included in the document.
R
备
e
注
热
磁
式
塑
Advertisement
