Advertisement
NO.S008 Pre-fab. Module Grounding Position Diagram
Pre-fab. module ground point (rear wall)
A2
A1
A/B enlarged at 10:1
B
Pre-fab. module ground point
Ground grid
A
A
A
A
A
Two external ground points are set for each pre-fab. module, and they are set on the
front wall. You can select a ground point to connect to the ground grid based on the
actual position. It is recommended that the ground point at the bottom of the module
be used. Before grounding, remove the foil. Tthe grounding bolt is an M12x30
stainless steel hexagon-head bolt and needs to be tightned to a torque of 470 (toque
GB9074_17-88_M12X30_S
8
Bolt assembly M12X30
1
No.
Qty Remarks
Item
Drawing No.
Advertisement
