Table of Contents
Advertisement
2.3 INSTALLATION INSTRUCTIONS
EXERCISE CAUTION AT ALL TIMES WHEN
WORKING WITH AC-POWERED EQUIPMENT.
TURN OFF YOUR DEVICES BEFORE INSTALLA-
TION.
BECAUSE OF THE SPECIAL PIN-OUT OF THE
CONNECTORS, USE THE CABLES SUPPLIED
BY THE MANUFACTURER.
When you need another cable for a certain device,
that is not supplied, contact your supplier to pur-
chase the right cable.
2.3.1 CONNECT CHARGING CRADLE
Start
Switch off the power of the host computer.
(ref. 1.) Choose proper place
Place the cradle in normal office conditions, avoid a
place under strong light.
(ref. 2.) Connect power
Connect the power supply.
End
Switch on the power of the host computer.
Place the bar code data collector in the cradle.
LED indicator
Typical LED indication:
red: power is on
12 - OPTICON OPL972X/CRD972X
1
2
Advertisement
Table of Contents
