Get Started - Opticon OPL 972X User Manual

D. Cleaning instructions
Clean the reading window periodically with a soft
dry cloth.
Clean the exterior by wiping it with a soft, dry cloth.
Do not use thinner, white spirit or other solvents.
These can discolour the case and the keys and has
a negative effect on the lifetime of the keys.
Clean the electrical contacts of the bar code data
collector and the cradle with a soft dry cloth, or cot-
ton bud.
Avoid touching the contacts The contacts must stay
as clean as possible to maintain optimal charging
capacity.
Do not use water when cleaning the cradle. This
can cause malfunction.
E. Maintenance
There are no user-serviceable parts inside the bar
code data collector or the cradle. So do not try to
take it apart. The manufacturer will not be liable for
any damage caused by the customer. In case of
serious malfunction, please consult your supplier.
F. Recycling & Disposal instructions
The icon on the product or package indicates that
the product should not be thrown in the home
waste bin. The product must be recycled as an
electronic product. For proper treatment of end-of-
life products consult the section for Environmental
care on www.opticon.com.
2

2 GET STARTED

DATA COLLECTOR:
Fix hand strap to bar code data collector.
Use the hand strap properly to avoid drop.
Read instructions in this manual.
Insert battery.
To be sure of proper operation, it is advised to start
with a fully charged battery.
Read instructions in this manual.
CRADLE:
Place the cradle in normal office conditions.
Avoid a place under strong light. Otherwise infra
red communication may be disturbed.
Read instructions in this manual.
Use properly.
Take notice that the CRD972X cradle is designed
for the OPL972X bar code data collector.
OPL972X/CRD972X OPTICON - 9