Table of Contents
Advertisement
3.0 Specifications
3.0 Specifications
Description
Maximum number of drill heads
Drill Diameters *
Lift Capacity
Center-to-Center Minimum
Center-to-Center Maximum
Minimum Distance Btw. Holes
(with optional auto-trip side
guide)
w/adjustable stops
w/fixed gages
Maximum Drilling Capacity
Cycles per minute (adj)
Backgauge Adjustment
Vertical Adj. Of Individual Heads
Dimensions
Table Space
Table Height
Overall Height
Overall Length
Overall Width
Floor Space Needed
Net Weight (approx.)
Shipping Weight
Electrical
Standard: 3 Phase, 60 Hz, AC, Pump - 3/4H.P., Spindle - 3 H.P.
Available in 208 Volts/14 Amps. 230 Volts/13.8 Amps. (Service size 20 Amps.)
Optional: 3 Phase, 50 Hz, AC, Pump – 3/4 H.P., Spindle 3 H.P.
Available in 208 Volts/14 Amps. Or 230 Volts/13.8 Amps. (Service size 2 0 Amps.)
The MS10B must be wired to an individual line through a disconnect box with
the proper voltage at the machine.
See Options for Large Hole Drilling and Triple Drill Head for drilling 3 holes on 1"
*
Centers
Challenge reserves the right to make changes to any product or specification without notice and with-
out incurring responsibility to existing units.
6
Inch Units
10
13 sizes from 1/8" to 1/2"
2" for drills 1/8-1/2"
2-1/2" for drills 1/4, 5/16,
3/8, 1/2
1-1/4"
21"
3/8"
1/4"
2-1/2"
18-26
0-9"
1/4"
18" x 27"
38"
60"
35"
40"
9.7 sq. ft.
1350 lbs.
1660 lbs.
Metric Units
10
3-13 mm
3-13 mm
6-13 mm
3.2 cm
53 cm
9.5 mm
6.4 mm
6.4 cm
18-26
0-23 cm
6 mm
46 x 69 cm
96 cm
152 cm
89 cm
102 cm
.90 sq. m.
612 kg.
753 kg.
Advertisement
Table of Contents
