5.0 Options
5.0 Options
Standard Drilling Head – P/N A-6594-6
Capacity is 2-1/2"/6.4cm. One 1/4" & one 5/16"
hollow drill included with each head.
(Can also be used with 2" hollow drills)
Triple Drilling Head – P/N A3-6594-5
Drills three holes at once on 1" Centers.
Capacity is 2-1/2"/6.4cm. Three 1/4 & three 5/16"
X 2-1/2 hollow drills are included.
Large Hole Drilling Conversion Kit P/N A-6500-7 sh't 5
This kit allows the drilling of hole diameters from
9/16" to 1-1/2". Includes one large hole drill head,
front guard cover extension, front and rear table adapter,
and six plastic drill blocks. (Drill bits are not included.
See Drill Accessories Section).
Large Hole Drill Head – A-6594-7
Allows the drilling of 9/16" – 1-1/2" diameter holes.
*Requires the installation of Large Hole Drilling Conversion
Kit. P/N A-6500-5
8