8.0 Accessories
8.10 Fiber Cutting Blocks
Catalog No. A-12607
These are recommended for use with the Cornermatic Round Cornering Attachment.
8.11 Plastic Drilling Blocks
Catalog No. 6669
Used for large hole drilling only.
8.12 Automatic Trip Side Guide
Catalog No. A-6565-3
Fits left side and includes six adjustable stops. Can be used for step drilling on multiple hole patterns.
8.13 Extra Side Guide Stops
Catalog No. S-1611-R For automatic trip side guide.
8.14 Fixed Side Guide
Catalog No. A-6565
For single lift drilling; second side guide for drilling two lifts in one stroke; or for drilling a lift on the
right and left side guides in two strokes.
8.15 Fixed Side Guide Gages
Fixed Gages - Saves time on multiple patterns. Fit in the auto trip side guide in place of adjustable
stops. Spacing is center-to-center distance of holes.
24 stops 1/4"/6.3 mm spacing #6653-4
16 stops 3/8"/9.5 mm spacing #6653-3
12 stops 1/2"/13 mm spacing #6653-2
Limited to those sizes presently in stock.
8.16 Chip Chute Extension
Empties chips out the rear of machine instead of into drill base bin.
Catalog No. #A-6676
8.17 Drill Head Grease
1 pint. For lubrication of MS-10B Drill Heads.
Catalog No. 6614
26
2-1/4" X 6"/( 57/ 152cm)