Examples - UTC Fire and Security Interlogix NX-535N Installation Manual

Examples

Recording leader message
1. Go to program mode of Voice module (Module 77).
2. Select Location 0.
• Segment 1 = 1 (= record mode)
• Segment 2 = 0 (= leader message)
3. Connect a telephone handset into the RJ11 phone jack connector on NX-
535N module.
4. Press the button on the NX-535N module and record your message through
the handset. Example: "This is your alarm system calling, press any key to
continue" (*).
5. Press the button again to stop recording. Your message is automatically
played back.
Recording event message #1
1. Go to program mode of Voice module (Module 77).
2. Select Location 0.
• Segment 1 = 1 (= record mode)
• Segment 2 = 1 (= event message 1)
3. Connect a telephone handset into the RJ11 phone jack connector on NX-
535N module.
4. Press the button on the NX-535N module and record your message through
the handset. Example: "Intrusion alarm".
5. Press the button again to stop recording. Your message is automatically
played back.
Recording address message
1. Go to program mode of Voice module (Module 77).
2. Select Location 0.
• Segment 1 = 1 (= record mode)
• Segment 2 = 17 (= address message)
3. Connect a telephone handset into the RJ11 phone jack connector on NX-
535N module.
NX-535N Voice Module Installation Manual 9