Washing sequence
Washing
1.Inlet selector
Set the selector to "WASH".(Figure1)
2.Add water
Machine begins to dispense detergent uniformly.(Figure2)
3.Put in the wash load. Add more water as
necessary.(Figure3)
4 Select intensity.
.
Select "SOFT " or "STANDARD" water flow
intensity according to the wash load.(Figure4)
5.Select wash time.
Select wash time according to the wash load.
(Figure5)
6.After the wash is completed, set the
switch to the "DRAIN" position.(Figure6 )
9
TOR
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6