Disposal After Washing - Candy RTT 261WSU-19 User Manual

Disposal after washing

 After each use, be sure to clean the lint and foreign materials from the lint filter and the
overflow filter in a timely fashion. Removing lint is important for healthy operation of the
machine.

Please remove the plug from the power outlet first before cleaning.
Cleaning the lint filter
The lint filter should always be used during washing and should be cleaned after each use
in a timely fashion.
On models RTT 2101WSU-19，RTT 2111WS-19.
1.To remove the lint filter, first press the elastic piece at the upper end
of the filter to release the tab from the filter cover, then pull outward.
2.Pull the lower end of the lint filter rear cover outward to
separate it from the lint filter front cover. Remove lint completely
by rinsing with clear water.
3.Re-install the lint filter.
On models RTT 261WSU-19，RTT 271WS-19.
1.Remove the lint filter.Place your hand in the shown position.
Push down to remove the filter.
2.Remove collected lint.
Place the filter in water and remove lint while wet.
3.Re-install the lint filter.
12