Table of Contents
Advertisement
Washing sequence
Washing
1.Inlet selector
Set the selector to "WASH".(Figure1)
2.Add water
Machine begins to dispense detergent uniformly.(Figure2)
3.Put in the wash load. Add more water as
necessary.(Figure3)
4 Select intensity.
.
Select "SOFT " or "NORMAL" water flow
intensity according to the wash load.(Figure4)
5.Select wash time.
Select wash time according to the wash load. (Figure5)
The washing instruction with soaking:
1 0-15 minutes is normal washing;
2 15-45 minutes is sport soaking and the pulsator will
run 2.5 minutes each 7.5 minutes interval, until sport soaking
is end, finally it is 15 minutes normal washing;
3 When the user select the soaking, firstly make sure the
detergent power is fully dissolved. Otherwise it may be
harmful to clothing.
6.After the wash is completed, set the switch to the "DRAIN"
position.(Figure6 )
9
TOR
Figure 1
Figure 2
Figure 3
normal
soft
Figure 4
wash program
0
5
45
10
15
Figure 5
30
wash time
off
drain
Figure 6
drain
Advertisement
Table of Contents
