Minimum Configuration In 3-Phase Wye Power Distribution Cabinets - Dell EMC ScaleIO Ready Node 14G Hardware Installation Manual

1U1N Configuration Equipment Installation
Hardware Installation Guide
28
Note
Install all the equipment in the cabinet before installing and connecting the power and
I/O cables.
Install the equipment as described in
l
page 20.
If you are installing the minimum configuration, refer to the figure and table below
l
for minimum configurations for the equipment stack up in the cabinet.
If you are installing the maximum configuration, refer to the figure and table below
l
for maximum configurations for the equipment stack up in the cabinet.
Component Description
Function
Data Server R640 Server
Management Server Management Server
Management Switch Customer provided 1
GbE switch
Data Switch Customer provided 10
GbE switch
Installation of the equipment in the cabinet
Table 7 Minimum configuration in 3-phase wye power
distribution cabinets
Quantity
3
1
1
2
on
Cabinet U Space
2 - 4
20
21
23-24