Aaeon GENE-LN05 Manual page 14

S u b C o m p a c t B o a r d

Parallel Port

USB Port

PS/2 Port

Digital I/O

Audio

Touch Screen
Note: For TF-GENE-LN05W2-B10-01, a thermal module for the DDR3
memory is recommended. We recommended using "Fujipoly: SARCON
XR-L" (1.2 watt/m-K) or better thermal pad for the thermal module.
Note 2: According to Intel EDS documents, the chipset supports the 4 types of
DRAM as shown in the table below. Please choose your DRAM according to
the EDS document to avoid compatibility issues.
- DDR3 DRAM Device Technology:
Standard 1-Gb and 2-Gb technologies and addressing are supported for
x16/ x8 devices. There is no support for SODIMMs with different
technologies or capacities on opposite sides of the same SODIMM. If one
Chapter 1 General Information
1- 6
G E N E - L N 0 5 R e v . B
RS-232/422/485 (auto flow) x 1
(AAEON recommends for the
Serial Port to be at the 9600 baud
rate during high temperature
operation.)
SPP/EPP/ECP x 1
USB2.0 x 7
Keyboard x 1, Mouse x 1
Supports 8-bit (Programmable)
Line-in, Line-out, Mic-in
Supports 4/5/8-wire resistive touch
screen
®