Camera Installation; Getting Started - Xblitz V3 MAGNETIC User Manual

CAMERA INSTALLATION

CAMERA INSTALLATION MANUAL
1. Select the mounting location of the camera. It is best to position the camera
so that the display preview shows the largest possible area in front of the car .
Make sure that the camera does not obscure the driver's view.
2. Install the mount on the windshield, then attach the camera.
3. Lead the USB cable as shown in the picture.
4. Plug the charger into the cigarette lighter socket.
5. Plug the mini USB cable into the mount.

02. GETTING STARTED

1. Mount and connect the camera to power.
2. Insert the micro SD memory card (formatted into the FAT32 file system) into
the camera.
Note! Please insert and remove the memory card only when the device is turned
o .
3. Set the following in the menu:
a. date and time,
b. loop recording (adjust the recording time according to your preferences),
c. set the highest available resolution,
CIGARETTE LIGHTER SOCKET
23
EN