Before Use - Xblitz V3 MAGNETIC User Manual

01. BEFORE USE

1. It is recommended to use branded micro SD cards (from 8GB to 256GB) with
speed class 10.
2. Before inserting the card into the DVR, format it into the FAT32 file system
on your computer, then do the same in the DVR.
3. The manufacturer does not guarantee that the camera will work with all
types of memory cards available on the market.
4. Install the memory card when the device is turned o , otherwise the card
and device may be damaged. The same applies to removing the card.
5. The camera has a built-in capacitor that allows the device to save its
settings after the power is turned o .
6. When the memory card is full, the oldest unsecured recordings will be
overwritten.
EN
7. It is recommended to use the features of the device for their intended
purpose, i.e. not to use the parking mode function and motion detection when
driving, as this may cause the recording to turn on and o automatically. Any
recording taken in these modes will be protected from being overwritten.
8. It is recommended that you set the G - SENSOR option to a minimum in
order to avoid securing unnecessary materials and thus losing space on the
memory card.
9. Sound: The device has a condenser microphone that records any ambient
noise. Sounds can overlap, causing distortion.
10. The camera has a built-in Wi-Fi module that allows wireless communication
with the camera using your Android or iOS smartphone. It o ers features such
as:
a. viewing video files and photos stored on the memory card on the camera,
b. the ability to change the settings of the camera,
c. real-time view of the image that the camera is recording.
11. The camera has a GPS module built into the click&go mount, thanks to
which you can record information about the speed at which your vehicle was
moving and its location.
21