Before First Use; Installation Of The Camera - Xblitz Dual Core User Manual

Before first use:

1. It is recommended to use high-quality class 10 microSD cards for this device (4 to 32 GB).
2. It is necessary to format the memory card to FAT32 format before inserting it into the recorder.
3. Do not remove or insert the memory card while the device in powered on, as this may damage the memory card.
4. The battery allows you to record for no more than 5 minutes without external power.
5. When the memory card is full, the oldest unprotected video will be overwritten.
6. It is recommended to use the device's functions in accordance with their intended purpose. Do not use the MOTION DETECTION or PARKING
SURVEILLANCE mode while driving as this may cause automatic turning the device on and off, during a stop at the intersection. It is
recommended to set the G – SENSOR sensitivity level at a minimum, in order to avoid securing unnecessary recordings and the loss of space on
the memory card. The memory card must be formatted in FAT32 format first on the PC and then on the recorder.
7. Sound: the device has a capacitive microphone, recording all the sounds from the environment. The sounds may overlap
causing distortion.

Installation of the camera:

www.xblitz.pl
20