Camera Installation - Xblitz PARK VIEW ULTRA User Manual

CAMERA INSTALLATION

1. Insert the memory card into the recorder.
2. Put the camera onto the rear mirror.
3. Mount the camera using the included rubbers.
4. Run the powering wire and the rear camera wire.
5. Connect the powering wire and the rear camera wire.
6. Connect the power adapter into the car cigarette lighter socket.
The place of additional camera installation, added to the set depends
on your predispositions. The camera meets the IP67 standards (resistant
to weather conditions).
Additional camera installation: Black wire connect to the microUSB slot in the
main device, run it to the place chosen for the rear camera installation
and connect it. Make sure that the main device is able to read the rear camera
(if no, make sure that the wire is correctly putted into both slots).
Rear camera installation: rear camera wires need to be connected to the rear
light wires (red = plus). This way of connection will enable the rear camera to work
as reversing camera. External installation should be properly isolated and should
not be mechanically taut.
19
EN