Camera Installation; Getting Started - Xblitz GO SE User Manual

Hide thumbs Also See for GO SE:

Table of Contents

Available languages

CAMERA INSTALLATION

LIGHTER SOCKER

1. Select and clean up the place destinated for

the camera installation.

2. Mount the camera grip.

3. Route the power cable.

4. Insert the power adapter into the cigarette lighter socket.

5. Insert the memory card into the camera.

6. Attach the camera to the grip.

1. Mount and connect the camera into the power adapter.

2. Insert (already formatted into the FAT32 ﬁle format) microSD memory card.

NOTE: the memory card should be putted in /out only when the device is o .

3. Set in the menu:

a. Date & time

b. Loop recording (adjust the length of the recordings). If you turn loop recording o ,

the ﬁles will not be overwritten.

c. Set the highest available resolution.

d. Set the G-Sensor on minimal possible sensitivity so the camera does not detect

road inequalities and protects unnecessary videos.

e. Turn WDR on.

4. Make sure that the motion detection and parking mode are turned o . If these

functions stay on during normal usage, they will negatively a ect the recordings.

Turning these functions on is recommended only when the vehicle is parked.

Table of Contents