L1
L2
PE
Power Connection
(1) Check and set the power and air supply.
Rated Voltage: AC220V +/-10%
Air Pressure: 0.5Mpa (5kg/cm2)
(2) Check and make sure the grounding wires are well connected.
(3) Check and make sure the power switch is set OFF .
(4) Power Connection: Single Phase Connection
Air Connection:
Plug the air supply. The air
pressure is preset. In case you
need to reset, pull up the switch
and rotate
to the setting value.
Power Line
Power ON
Brown Wire
Blue Wire
Green/Yellow Wire (PE)
P3