Kernau KBR 17133.1 S NF Instruction Booklet page 41

FREEZER TEMPERATURE SETTING
• Initial temperature value for Freezer Setting Indicator is -18°C.
• Press freezer set button once. When you first push this button, the last set value will blink
on screen.
• Whenever you press on this button, lower temperature will be set (-16°C, -18°C, -20°C,
-22°C, -24°C superfreeze).
• When you push the freezer set button until superfreeze symbol appears, and if you do not
push any button in 1 seconds Super Freeze will flash.
• If you continue to press, it will restart from -16°C.
• The temperature value selected before Holiday Mode, Super Freeze Mode, Super Cool
Mode or Economy Mode is activated will remain the same when the mode is over or
cancelled. The appliance continues to operate with this temperature value.
Door open alarm function
If cooler or freezer door is opened more than 2 minutes , appliance sounds 'beep beep'.
Warnings about Temperature Adjustments
• Temperature adjustments should be made according to the frequency of door openings and
the quantity of food kept inside the fridge.
• Do not pass to another adjustment before completing an adjustment.
• Your fridge should be operated up to 24 hours according to the ambient temperature without
interruption after being plugged in to be completely cooled. Do not open doors of your fridge
frequently and do not place much food inside it in this period.
• A 5 minute delaying function is applied to prevent damage to the compressor of your fridge,
when you take the plug off and then plug it on again to operate it or when an energy
breakdown occurs. Your fridge will start to operate normally after 5 minutes.
• Your fridge is designed to operate in the ambient temperature intervals stated in the standards,
according to the climate class stated in the information label. We do not recommend
operating your fridge out of stated temperatures value limits in terms of cooling effectiveness.
• This appliance is designed for use at an ambient temperature within the 16°C - 43°C range.
EN 40