Kernau KBR 17133.1 S NF Instruction Booklet page 40

Screen saver mode
When would it be used?
This mode saves energy by switching
off all control panel lighting when the
panel is left inactive..
During this mode:
• Screen saver mode will be activated automatically after 30 seconds.
• If you press any key while the lighting of the control panel is off, the current machine
settings will reappear on the display to let you make any change you wish.
• If you do not cancel the screen saving mode or press any key for 30 seconds, control panel
will remain off.
• To cancel the screen saving mode, first of all, you need to press any key to activate the
keys and then press and hold the Mode button "M" (#5) for 3 seconds.
• To reactivate screen saving mode, press and hold the mode button "M" (#5) for 3 seconds.
COOLER TEMPERATURE SETTINGS
• Initial temperature value for Cooler Setting Indicator is +4 °C.
• Press cooler button once. When you first push this button, the last value appears on the
setting indicator of the cooler.
• Whenever you press on this button, lower temperature will be set. (+8°C, +6°C, +5°C,
• 4°C, +2°C, supercool)
• When you push the cooler set button until supercool symbol appears, and if you do not push
any button in 1 seconds Super Cool will flash.
• If you continue to press, it will restart from +8°C.
• The temperature value selected before Holiday Mode, Super Freeze Mode, Super Cool
Mode or Economy Mode is activated will remain the same when the mode is over or
cancelled. The appliance continues to operate with this temperature value.
EN 39