HP 8920B Programmer's Manual page 502

Chapter 8, Programming The Call Processing Subsystem
Programming The CALL CONTROL Screen
Pwr Lvl:
502
The field is divided into two fields:
Pwr Lvl:
• The left-hand field displays the mobile station's output power level assignment for the
voice channel currently being used by the Test Set and the mobile station.
A numeric value is only displayed when a mobile station is actively connected on a
voice channel (that is, the Connect annunciator is lit). A "-" is displayed if a mobile
station is not actively connected on a voice channel.
This is a read only field.
The :AVCPower? command is used to query the contents of the left-hand subfield.
There is no command form of the :AVCPower? command.
Syntax
:AVCPower?
Example
OUTPUT 714;"CALLP:AMPS:AVCP?"
ENTER 714;Active_vc_pwr$
• The right-hand subfield (highlighted field) is used to enter the Voice Mobile
Attenuation Code (VMAC). The VMAC determines the mobile station power level to
be used on the designated voice channel (the channel number entered into the Chan:
right-hand subfield).
The :VMACode command is used to control the right-hand subfield.
The query form of the command (that is, :VMACode?) can be used to determine the
current VMAC setting.
Syntax
:VMACode?
:VMACode <integer number 0 to 7>
Example
OUTPUT 714;"CALLP:AMPS:VMAC 3"
OUTPUT 714;"CALLP:AMPS:VMAC?"
ENTER 714;Vmac_setting