HP 8920B Programmer's Manual page 406

Chapter 7, IBASIC Controller
Method #1. Program Development on an External BASIC Language Computer
Uploading Programs from the Test Set to an External BASIC Controller through
HP-IB
406
To upload a program from the Test Set to an external BASIC language controller
through HP-IB the following program, which uses a command from the
PROGram subsystem to initiate the upload, must be running on the external
BASIC language controller. The uploaded program is stored to a file specified by
the user.
In the following program the external BASIC language controller is a PC running
TransEra HT BASIC. The file is stored to the C:\HTB386 directory. If the
external BASIC language controller is an HP 9000 Series 200/300 Workstation,
modify the mass storage volume specifier appropriately. After running the
program, the uploaded program code will be in the designated file. Use the GET
command to retrieve the file for editing.