RF IN/OUT
Figure 32
Connecting a Mobile Station to the Test Set
NOTE:
Do not connect the antenna of the mobile station to the ANT IN port on the front panel of the
ANT IN
Microphone In
Antenna
Test Set as this will cause the overpower protection circuitry to trip when the mobile station
is transmitting. Refer to the ANT IN field description in the User's Guide for further
information.
Refer to the User's Guide for detailed information on connecting a mobile station
to the Test Set.
Chapter 8, Programming The Call Processing Subsystem
Using the Call Processing Subsystem's Remote User Interface
Speaker Out
AUDIO OUT
AUDIO IN
HI
Mobile Station
Manufacturer's
Special Fixture
LO
465