Table of Contents
Advertisement
SCPI PROGram Subsystem
Test Set PROGram Subsystem
The SCPI PROGram Subsystem was designed to support instruments which can
store multiple programs in RAM memory at the same time. The SCPI PROGram
Subsystem provides commands which allow multiple programs to be named,
defined and resident in the instrument at the same time. The Test Set does not
support this capability.
For complete information on the SCPI PROGram Subsystem refer to the Standard
Commands for Programmable Instruments (SCPI) Standard. If you are not
familiar with SCPI, it is recommended that you obtain a copy of the book: A
Beginner's Guide to SCPI (ISBN 0-201-56350, Addison-Wesley Publishing
Company).
The Test Set was designed to store only one IBASIC program in RAM memory at
any given time. The PROGram Subsystem commands, as implemented in the Test
Set, operate differently than described in the SCPI Standard. In addition, the SCPI
PROGram Subsystem commands which were designed to support multiple
programs are not supported in the Test Set.
Supported SCPI Commands
The Test Set supports the following subset of the :SELected SCPI commands.
•
:SELected:DEFine
•
:SELected:DEFine?
•
:SELected:DELete:ALL
•
:SELected:EXECute
•
:SELected:NUMBer
•
:SELected:NUMBer?
•
:SELected:STATe
•
:SELected:STATe?
•
:SELected:STRing
•
:SELected:STRing?
•
:SELected:WAIT
Chapter 7, IBASIC Controller
PROGram Subsystem
425
Hide quick links:
Advertisement
Table of Contents
