Performing A Firmware Update - Kaco blueplanet 3.0 TL3 M2 WM OD IIG0 Manual

Hide thumbs Also See for blueplanet 3.0 TL3 M2 WM OD IIG0:

Operating instructions manual (262 pages)

Quick installation manual (92 pages)

Operating instruction (268 pages)

Table Of Contents

Table of Contents

9 | Configuration and operation

NOTE

You can also access the web server of the device via the Internet. To do this, additional settings of your net-

work configuration, particularly your internet router, are required. Note that communication with the device is

carried out over an unsecured connection, particularly in the case of a connection via the internet.

↻ Configure the Ethernet interface.

↻ Connect the Ethernet cable.

1. Open an Internet browser.

2. In the address field of the internet browser, enter the IP address of the device and open the site.

ð The internet browser displays the home screen of the web server.

After it has opened, the web server displays information about the device as well as the current yield data.

– Feed-in power

– Status

– Grid power

– Grid voltage

Tab. 4: Display of measurement and yield data

In order to display and export yield data, proceed as follows:

Select the display period

1. Call up the web server

2. Select the display period by selecting one of the buttons: daily view, monthly view, yearly view or

overview.

Filtering the display period (only possible with daily view)

1. Open the web server.

2. Select the daily view.

3. To show or hide measurements, select or deselect the corresponding checkboxes in the "Choose view" area.

Exporting data

1. Filter the display data if necessary.

2. Select the display period if applicable (daily, monthly, yearly or overview).

3. Press the "Export data" button.

4. Save the file.

NOTE

Regardless of the display data selected in the "Choose view" area, an export file always contains all measure-

ment data and yield data available for the selected period.

9.6