Performing A Firmware Update - Kaco blueplanet 29.0TL3 Manual

Manual
9.6

Performing a firmware update

You can update the software of the device to a new version using the integrated USB interface. Use a FAT32-
formatted USB stick to do this.
Do not use any storage media with an external power supply (for example: an external hard disk).
New functions can be added to the device via firmware updates.
AVISO
Ensure the active DC power supply of the device
It is only possible to update all of the device's components to the most current firmware version in this opera-
ting state.
ATENCIÓN
Damage to the device from faulty power supply
The update can fail if the power supply is interrupted during the update process. Parts of the software or of the device it-
self may be damaged.
1. Never disconnect the DC and AC power supply for or during a firmware update.
2. Do not remove the USB stick during the firmware update.
Preparing a firmware update
1. Download the firmware update file from the KACO web site
disk.
2. Extract the complete firmware update file to a USB stick.
ð Perform the firmware update.
AVISO
In order to adopt new country-specific parameters, the set user country must be changed prior to
every firmware update.
1. Once the firmware update is complete, you can return to the original user country.
AVISO
The firmware update can take several minutes. The „Operating"LED flashes during the update process. The
device may restart several times as required.
The following message appears if the DC power supply is too low: „Tensión de aliment. CC demasiado baja!
Quiere no obstante actualizar? .
In this case, select „No" and perform the update with a stable power supply.
f the unit remains in DC feed mode for a longer period of time due to a malfunction, it must be restarted by
switching off the AC/DC voltage.
Performing a firmware update
↻ Ensure that the power supply is connected.
1. Connect the USB stick to the device.
ð The message appears on the display: "Software encontrado. Quiere cargarlo?"
2. If you would like to perform the update, press the "Yes" button. If "No", pressing the "Enter" button cancels the
update process and the device goes into feed-in mode.
Kaco blueplanet 29.0TL3
Configuration and operation | 9
www.kaco-newenergy.com and store it on your hard
Página 57