ACME Theatre LED Colour Flood User Manual page 10

display, use the UP/DOWN button to select the English or Chinese, press the ENTER button
to store. Press the MENU button back to the last menu or let the unit idle one minute to exit
menu mode.
Fixture Test
To select Fixture Test press the ENTER button to confirm, present mode will blink on the display,
use the UP/DOWN button to select the Auto Test or Manual Test press the ENTER button to store.
Press the MENU button back to the last menu or let the unit idle one minute to exit menu mode.
Fixture Information
Enter menu mode, select Fixture Information, press the ENTER button to confirm, use the
UP/DOWN button to select the Fixture Use Time, LED Temp. or Firmware Version.
Fixture Use Time
To select Fixture Use Time, press the ENTER button to confirm, and running time of the
fixture will show on the display. Press the MENU button back to exit.
LED Temp.
To select LED Temp., press the ENTER button to confirm, the current running temperature of
the fixture will show on the display. Press the MENU button back to exit.
Firmware Version
To select Firmware Version, press the ENTER button to confirm, the software version will
show on the display. Press the MENU button back to exit.
Factory Setting
Select Factory Setting, press the ENTER button to confirm, present mode will blink on the display.
Use the DOWN and UP button to select the No or Yes (Switch back to default settings). Hold and
press the MENU button about one second or wait for one minute to exit the menu mode.
9B