Changes To Evaluation Software Hyperlink; Downloading The Evaluation Software - Analog Devices ADIS1650 Series User Manual

UG-ADIS1650x
6. Click on Install to continue with the installation if this
message appears during the process:
7. Click Finish to complete the process.

DOWNLOADING THE EVALUATION SOFTWARE

The evaluation software for the
from the ADI IMU ftp site
1. Navigate to the ftp site by clicking here:
ftp://ftp.analog.com/pub/IMU/IMU_FTP_Directory.htm
2. Click on "IMU Evaluation 1.18.xx" where "xx" is the latest
version posted on the FTP site.
After the EXE file downloads, place it in a convenient location
on the host PC, but don't run it until the evaluation board is
connected to the PC.
Note: If the user runs the software before connecting the
evaluation board, the user will see the following pop-up
windows and errors:
ADIS16505 can be downloaded
Rev. PR.C | Page 6 of 11
ADIS1650x/PCBZ User Guide
If this occurs, the user should exit out of the software, and
proceed to the "EVAL-ADIS2 Physical Connections" section of
this user guide and ensure that the evaluation board is properly
connected and powered prior to running the evaluation
software.