Sfu Ont Power/Alarm Connector; Figure 14. Power/Alarm And Ups Connectors; Table 4. Power/Alarm Connector Pinout - ADTRAN Total Access 362R Installation And Maintenance Manual

SFU ONT Power/Alarm Connector

The SFU ONT is provided with a 7‐pin Euro‐style connector (see Figure 14).
Table 4 lists the Pinout designations for the Power/Alarm connector.
1. Remove the Power/Alarm connector from the Electronics Module by pulling it directly
61187715G1-5B
Pin 1
Power/Alarm
Connector
(Note: Refer to the sticker on the bottom
of the Power/Alarm Connector if needed)

Figure 14. Power/Alarm and UPS Connectors

Table 4. Power/Alarm Connector Pinout

Pin
1
2
3
4
5
6
7
from the module (see Figure 15 on page 28).
Low Battery
1
2 Battery Missing
Pin 7
3 Replace Battery
4
On Battery
5
Signal Return
6
12V Return
7
+12VDC
UPS Power
Connector
Description
Low Battery
Battery Missing
Replace Battery
On Battery
Signal Return
12 V Return
+12 VDC
Installation
27