Page 1 TS6400 series Online Manual English...
Page 2: Table Of Contents
Contents Using Online Manual..........8 Symbols Used in This Document.
Page 3 Ink Tips................83 If Printing Is Faint or Uneven.
Page 4 Power Supply..............135 Checking that Power Is On.
Page 5 Printing Using Canon Application Software........
Page 6 Network Key (Password) Unknown..........238 Printer Cannot Be Used After Replacing Wireless Router or Changed Router Settings.
Page 7 List of Support Code for Error........295 What to Do When Paper Is Jammed.
Page 8: Using Online Manual
Using Online Manual Operating Environment Symbols Used in This Document Touch-enabled Device Users (Windows) Printing Online Manual Trademarks and Licenses Screenshots in This Manual...
Page 9: Symbols Used In This Document
Symbols Used in This Document Warning Instructions that, if ignored, could result in death, serious personal injury, or property damage caused by incorrect operation of the equipment. These must be observed for safe operation. Caution Instructions that, if ignored, could result in personal injury or property damage caused by incorrect operation of the equipment.
Page 10: Touch-Enabled Device Users (Windows)
Touch-enabled Device Users (Windows) For touch actions, you need to replace "right-click" in this document with the action set on the operating system. For example, if the action is set to "press and hold" on your operating system, replace "right-click" with "press and hold."...
Page 11: Trademarks And Licenses
(1998) are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. • Bluetooth is a trademark of Bluetooth SIG, Inc., U.S.A. and licensed to Canon Inc. • Autodesk and AutoCAD are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries.
Page 12 EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Page 13 control systems, and issue tracking systems that are managed by, or on behalf of, the Licensor for the purpose of discussing and improving the Work, but excluding communication that is conspicuously marked or otherwise designated in writing by the copyright owner as "Not a Contribution."...
Page 14 this License, without any additional terms or conditions. Notwithstanding the above, nothing herein shall supersede or modify the terms of any separate license agreement you may have executed with Licensor regarding such Contributions. 6. Trademarks. This License does not grant permission to use the trade names, trademarks, service marks, or product names of the Licensor, except as required for reasonable and customary use in describing the origin of the Work and reproducing the content of the NOTICE file.
Page 15 PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. ---- Part 2: Networks Associates Technology, Inc copyright notice (BSD) ----- Copyright (c) 2001-2003, Networks Associates Technology, Inc All rights reserved.
Page 16 IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ---- Part 4: Sun Microsystems, Inc. copyright notice (BSD) ----- Copyright c 2003 Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, California 95054, U.S.A.
Page 17 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;...
Page 18 * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * The name of Fabasoft R&D Software GmbH & Co KG or any of its subsidiaries, brand or product names may not be used to endorse or promote products derived from this software without specific prior written permission.
Page 19 * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * Neither the name of ScienceLogic, LLC nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
Page 20 DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS...
Page 21 Written by Joel Sherrill <joel@OARcorp.com>. COPYRIGHT (c) 1989-2000. On-Line Applications Research Corporation (OAR). Permission to use, copy, modify, and distribute this software for any purpose without fee is hereby granted, provided that this entire notice is included in all copies of any software which is or includes a copy or modification of this software.
Page 22 ---------------------------- 2006-Jan-27 Copyright 1996-2002, 2006 by David Turner, Robert Wilhelm, and Werner Lemberg Introduction ============ The FreeType Project is distributed in several archive packages; some of them may contain, in addition to the FreeType font engine, various tools and contributions which rely on, or relate to, the FreeType Project. This license applies to all files found in such packages, and which do not fall under their own explicit license.
Page 23 `You' refers to the licensee, or person using the project, where `using' is a generic term including compiling the project's source code as well as linking it to form a `program' or `executable'. This program is referred to as `a program using the FreeType engine'. This license applies to all files distributed in the original FreeType Project, including all source code, binaries and documentation, unless otherwise stated in the file in its original, unmodified form as distributed in the original archive.
Page 24 Therefore, by using, distributing, or modifying the FreeType Project, you indicate that you understand and accept all the terms of this license. 4. Contacts ----------- There are two mailing lists related to FreeType: o freetype@nongnu.org Discusses general use and applications of FreeType, as well as future and wanted additions to the library and distribution.
Page 25 Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: - Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. - Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
Page 26 * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * Neither the name of the CRYPTOGAMS nor the names of its copyright holder and contributors may be used to endorse or promote products derived from this software without specific prior written permission.
Page 27 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
Page 28 * Redistributions of source code must retain the above copyright notice, this list of conditions, and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions, and the following disclaimer in the documentation or other materials provided with the distribution. * Neither the name CryptoJS nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
Page 29: Network
Network Available Connection Methods The following connection methods are available on the printer. • Wireless Connection Connect the printer and devices (e.g. computer/smartphone/tablet) using a wireless router. If you have a wireless router, we recommend you use one for wireless connection. ◦...
Page 30 Changing Network Settings See below for changing connection settings for the printer and computer/smartphone/tablet. • To change network connection method: Reconfiguration Method of Wi-Fi Connection Changing the Connection Mode • To add computer/smartphone/tablet to the printer: Connects to Another Computer via LAN/Changes from USB to LAN Connection •...
Page 31: Restrictions
Restrictions When connecting another device while a device (such as a computer) is already connected to the printer, connect it using the same connection method as the connected device. If you connect using a different connection method, the connection to the device in use will be disabled. Connect via wireless router •...
Page 32 • In Wireless Direct mode, you can connect up to five devices at the same time. If you try to connect a sixth device while five devices are already connected, an error will appear. If an error appears, disconnect a device that does not use the printer, then configure settings again. •...
Page 33: Network Connection Tips
Network Connection Tips Default Network Settings Detect Same Printer Name Connects to Another Computer via LAN/Changes from USB to LAN Connection Printing Network Settings Reconfiguration Method of Wi-Fi Connection Connecting with Wireless Direct...
Page 34: Default Network Settings
Enable/disable IPv6 Enable Enable/disable WSD Enable Timeout setting 15 min. Enable/disable Bonjour Enable Service name Canon TS6400 series LPR protocol setting Enable RAW protocol Enable LLMNR Enable PictBridge communication (Enable/disable communication) Enable ("XX" represents alphanumeric characters.) * Default value depends on printer. To check value, use operation panel.
Page 35 *2 The password is specified automatically when the printer is turned on for the first time.
Page 36: Detect Same Printer Name
Detect Same Printer Name When the printer is detected during setup, plural printers with the same name may appear on the results screen. Select a printer with checking the printer settings against those on detection result screen. • For Windows: Check the printer's MAC address or serial to select the correct printer from the results.
Page 37: Connects To Another Computer Via Lan/Changes From Usb To Lan Connection
Connects to Another Computer via LAN/Changes from USB to LAN Connection To connect an additional computer to the printer via LAN, or to change from USB to LAN connection, click here and perform setup.
Page 38: Printing Network Settings
XXXXXXXX Network Diagnostics Network diagnostics – Diagnostic Result Diagnostic result XXXXXXXX Result Codes Result codes XXXXXXXX Result Code Details Result code details http://canon.com/ijnwt Wireless LAN Wireless LAN Enable/Disable Infrastructure Infrastructure Enable/Disable 3-2-1 Signal Strength Signal strength 0 to 100 [%]...
Page 39 3-2-2 Link Quality Link quality 0 to 100 [%] 3-2-3 Frequency Frequency XX (GHz) 3-2-4 MAC Address MAC address XX:XX:XX:XX:XX:XX 3-2-5 Connection Connection status Active/Inactive 3-2-6 SSID SSID Wireless LAN network name (SSID) 3-2-7 Channel Channel XX (1 to 13) 3-2-8 Encryption Encryption method...
Page 40 3-2-25 Stateless Prefix Stateless prefix length Length4 3-2-26 Default Gateway1 Default gateway 1 XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX 3-2-27 Default Gateway2 Default gateway 2 XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX 3-2-28 Default Gateway3 Default gateway 3 XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX 3-2-29 Default Gateway4 Default gateway 4 XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX 3-2-33 IPsec IPsec setting Active/Inactive...
Page 41 Other Settings Other settings – Printer Name Printer name Printer name (Up to 15 alphanumeric characters) Wireless Direct Dev- Device name for wire- Device name for wireless direct (Up to 32 alphanumeric Name less direct characters) WSD Printing WSD printing setting Enable/Disable WSD Timeout Timeout...
Page 42 Web Services Web Services – Unsent Usage Logs Number of unsent us- 0 to 200 age logs Usage Log Last Sent Last date when usage XXXXXXXX log was sent Web Service Status Registration status Not set/Disabled/Registration pending/Registered Log Transmission Sta- Transmission result Not activated/Processing/Server error/Connection error/ Timeout error/Error/Awaiting server response/Active...
Page 43: Reconfiguration Method Of Wi-Fi Connection
Reconfiguration Method of Wi-Fi Connection Follow either procedure below to change Wi-Fi connection method (infrastructure or Wireless Direct). • For Windows: ◦ See Changing the Connection Mode. ◦ Perform settings on the Network Settings screen on IJ Network Device Setup Utility. Important Before you perform settings using IJ Network Device Setup Utility, turn on Easy wireless connect mode on the printer following the procedure below.
Page 44: Connecting With Wireless Direct
Connecting with Wireless Direct You can connect devices (e.g. computer, smartphone, or tablet) to the printer by two methods below. • Wireless connection (connecting devices via a wireless router) • Direct wireless connection (connecting devices directly without a wireless router) This section describes Wireless Direct, which allows you to print by connecting the devices to the printer directly.
Page 45 • The password is required when connecting a device to the printer. Depending on the device you are using, no password is required. • When you connect a Wi-Fi Direct compatible device to the printer, select the device name from your device.
Page 46 Make sure the name on the LCD is the same as that of your wireless communication device and select Yes. You can print from your smartphone or tablet by installing Canon PRINT Inkjet/SELPHY. Download it from App Store and Google Play.
Page 47 A confirmation screen is displayed whether you want to display password information. When you select ON or OFF, the setting values for using the printer with Wireless Direct are displayed. The setting values for using the printer with Wireless Direct are displayed. •...
Page 48 1. Select Auto update and press OK button. 2. Select Yes and press OK button. 3. To show the password, select ON and to hide the password, select OFF and press OK button. You can check the updated setting. • Connection request confirmation Change the confirmation screen setting when a Wi-Fi Direct compatible device is connecting to the printer.
Page 49: Ij Network Device Setup Utility (Macos)
IJ Network Device Setup Utility (macOS) IJ Network Device Setup Utility Starting Up IJ Network Device Setup Utility Diagnosing and Repairing Network Settings List of Models Which Does Not Support Diagnosis and Repair Function...
Page 50: Ij Network Device Setup Utility
IJ Network Device Setup Utility If anything is wrong with connection, IJ Network Device Setup Utility diagnoses the settings of the printer and those of computer on which it is installed. In addition, IJ Network Device Setup Utility restores the status of the printer and computer.
Page 51: Starting Up Ij Network Device Setup Utility
Starting Up IJ Network Device Setup Utility Start up Launchpad, select Canon Utilities, and then select IJ Network Device Setup Utility. When you start up IJ Network Device Setup Utility, the screen below appears. Enter the password specified for your computer and select Install Helper. IJ Network Device Setup Utility starts diagnosis and repair of network.
Page 52: Diagnosing And Repairing Network Settings
Diagnosing and Repairing Network Settings IJ Network Device Setup Utility diagnoses and repairs computer settings or connection between the computer and printer when a problem (e.g. cannot print from a printer on the network) occurs. Important • Some models do not support diagnosis and repair function. For details: List of Models Which Does Not Support Diagnosis and Repair Function IJ Network Device Setup Utility starts checking the computer settings when it starts up.
Page 53: List Of Models Which Does Not Support Diagnosis And Repair Function
List of Models Which Does Not Support Diagnosis and Repair Function The following models does not support "Diagnose and Repair" function of IJ Network Device Setup Utility. • G4000 series • PRO-500 series • PRO-1000 series • MB2100 series • MB2700 series •...
Page 54: Handling Paper, Originals, Fine Cartridges, Etc
Handling Paper, Originals, FINE Cartridges, etc. Loading Paper Loading Originals Replacing a FINE Cartridge...
Page 55: Loading Paper
Loading Paper Paper Sources Loading Plain Paper / Photo Paper in Rear Tray Loading Plain Paper in Cassette Loading Envelopes in Rear Tray...
Page 56: Paper Sources
Paper Sources The printer has two paper sources for feeding paper, the rear tray (A) and cassette (B). Rear tray You can load all supported paper such as plain paper and photo paper on the rear tray. Supported Media Types Cassette You can load A4, B5, A5, or Letter-sized plain paper in the cassette.
Page 57: Loading Plain Paper / Photo Paper In Rear Tray
For details on the Canon genuine paper, see Supported Media Types. • You can use general copy paper or Canon Red Label Superior WOP111/Canon Océ Office Colour Paper SAT213. For the page size and paper weight you can use for this printer, see Supported Media Types.
Page 58 3. Open the feed slot cover (C). 4. Slide right paper guide (D) to open both paper guides. 5. Load paper stack in portrait orientation WITH PRINT SIDE FACING UP. 6. Slide right paper guide (D) to align with both sides of paper stack. Do not slide the paper guides too hard against the paper.
Page 59 Important • Always load paper in portrait orientation (E). Loading paper in landscape orientation (F) can cause paper jams. Note • Do not load sheets of paper higher than the load limit mark (G). 7. Close feed slot cover (C) gently.
Page 60 After closing the feed slot cover, the paper setting confirmation screen for the rear tray appears on the LCD. 8. If page size and media type on LCD match size and type of paper loaded in rear tray, select If not, select Change to change the settings in accordance with the size and type of the loaded paper. 9.
Page 61 Note • There are various types of paper, such as paper with a special surface coating for printing photos at optimal quality and paper suitable for documents. Each media type has specific preset settings (how ink is used and sprayed, distance from nozzles, etc.), that allow you to print to that type with optimal image quality.
Page 62: Loading Plain Paper In Cassette
Note • In the cassette, be sure to load only plain paper. • You can use general copy paper or Canon Red Label Superior WOP111/Canon Océ Office Colour Paper SAT213. For the page size and paper weight you can use for this printer, see Supported Media Types.
Page 63 4. Slide paper guides (C) in front and (D) on right to open guides. 5. Load paper stack in portrait orientation WITH PRINT SIDE FACING DOWN, and place it in center of cassette. Important • Always load paper in portrait orientation (E). Loading paper in landscape orientation (F) can cause paper jams.
Page 64 If the paper stack is in contact with the protrusion (G), the paper may not be fed properly. 6. Slide front paper guide (C) to align it with paper stack. Align paper guide with where it clicks into place. 7. Slide right paper guide (D) to align it with paper stack. Do not slide the paper guide too hard against the paper.
Page 65 8. Mount cassette cover (B) and insert cassette into printer. Push the cassette into the printer until it stops. 9. Pull out the paper output tray (J) and open the paper output support (K). Note • To prevent incorrect printing, this printer has a function that detects whether the settings for the paper loaded in the cassette matches the paper settings.
Page 67: Loading Envelopes In Rear Tray
Loading Envelopes in Rear Tray You can load Envelope DL and Envelope Com 10 on the rear tray. The address is automatically rotated and printed according to the envelope's direction by specifying with the printer driver properly. Important • Printing of envelopes from the operation panel or from a PictBridge (Wi-Fi) compliant device is not supported.
Page 68 3. Open the feed slot cover (C). 4. Slide right paper guide (D) to open both paper guides. 5. Load envelopes in portrait orientation WITH PRINT SIDE FACING UP. Up to 10 envelopes can be loaded at once. Fold flap of the envelope and load the envelope in portrait orientation with the address side facing up. 6.
Page 69 Note • Do not load envelopes higher than the load limit mark (E). 7. Close feed slot cover (C) gently. After closing the feed slot cover, the paper setting confirmation screen for the rear tray appears on the LCD.
Page 70 8. If page size and media type shown on LCD match size and type of envelopes loaded in rear tray, select OK. If not, select Change to change the settings in accordance with the size and type of the loaded envelopes.
Page 71: Loading Originals
Loading Originals Loading Originals on Platen Supported Originals How to Detach / Attach the Document Cover...
Page 72: Loading Originals On Platen
Loading Originals on Platen 1. Open the document cover. 2. Load original WITH SIDE TO SCAN FACING DOWN on platen. Align the corner of the original with the alignment mark Supported Originals Important • Be sure to observe the following when loading the original on the platen. Failure to observe the following may cause the scanner to malfunction or the platen glass to break.
Page 73 3. Close the document cover gently. Important • After loading the original on the platen, be sure to close the document cover before starting to copy or scan.
Page 74: Supported Originals
Supported Originals Item Details Types of originals • Text document, magazine, or newspaper • Printed photo, postcard, business card, or disc (BD/DVD/CD, etc.) Size (width x height) Max. 8.5 x 11.7 in. (216 x 297 mm) Note • When loading a thick original such as a book on the platen, you can load it by removing the document cover from the printer.
Page 75: How To Detach / Attach The Document Cover
How to Detach / Attach the Document Cover Detaching the document cover: Hold up the document cover in portrait orientation and then tip it back. Attaching the document cover: Fit both hinges (A) of the document cover into the holder (B) and insert both hinges of the document cover vertically as illustrated below.
Page 77: Replacing A Fine Cartridge
Replacing a FINE Cartridge Replacing a FINE Cartridge Checking Ink Status on the LCD Ink Tips...
Page 78: Replacing A Fine Cartridge
Replacing a FINE Cartridge When remaining ink cautions or errors occur, the error message will appear on the LCD to inform you of the error. In this state, the printer cannot print or scan. Check the error message and take appropriate action. When Error Occurred Replacing Procedure When you need to replace a FINE cartridge, follow the procedure below.
Page 79 2. Open the scanning unit / cover. The FINE cartridge holder moves to the replacement position. Important • Do not touch the metallic parts or other parts inside the printer. 3. Remove the empty FINE cartridge. 1. Pick up the ink cartridge locking cover to open it. 2.
Page 80 4. Prepare a new FINE cartridge. 1. Take new FINE cartridge out of its package and remove protective tape (C) gently. Important • Do not touch the electrical contacts or print head nozzle on a FINE cartridge. The printer may not print properly if you touch them.
Page 81 6. Close the scanning unit / cover. To close the scanning unit / cover, hold it up once, then take it down gently. Caution • When closing the scanning unit / cover, be careful not to get your fingers caught. Note •...
Page 82: Checking Ink Status On The Lcd
Checking Ink Status on the LCD Check that printer is turned on. 2. Press the OK button. Note • A symbol appears in the area A if there is any information about the remaining ink level. 3. Select Estimated ink levels. A symbol is displayed on top of the FINE Cartridge (area B) where there is a notification.
Page 83: Ink Tips
Ink may be used for purposes other than printing. It is used for cleaning to keep the printing clean. To keep printer's performance, Canon printer performs cleaning automatically according to its condition. A small amount of ink is consumed when cleaning.
Page 84: If Printing Is Faint Or Uneven
If Printing Is Faint or Uneven Maintenance Procedure Printing the Nozzle Check Pattern Examining the Nozzle Check Pattern Cleaning the Print Head Deep Print Head Cleaning Aligning the Print Head Aligning the Print Head Manually...
Page 85: Maintenance Procedure
Maintenance Procedure If print results are blurred, colors are not printed correctly, or print results are unsatisfactory (e.g. misaligned printed ruled lines), perform the maintenance procedure below. Important • Do not rinse or wipe the FINE cartridge. This can cause trouble with the FINE cartridge. Note •...
Page 86 If the problem is still not resolved: Replace the FINE cartridge. Step5 Replacing a FINE Cartridge Note • If the problem is still not resolved after replacing the FINE cartridge, contact your nearest Canon service center to request a repair.
Page 87 When the Print Results Are Not Even such as the Ruled Lines Are Misaligned: Align the print head. Step From the printer Aligning the Print Head From the computer • For Windows: Adjusting Print Head Position Automatically • For macOS: Adjusting Print Head Position...
Page 88: Printing The Nozzle Check Pattern
Printing the Nozzle Check Pattern Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzle. Note • If the remaining ink level is low, the nozzle check pattern will not be printed correctly. Replace the FINE cartridge whose ink is low.
Page 89: Examining The Nozzle Check Pattern
Examining the Nozzle Check Pattern Examine the nozzle check pattern, and clean the print head if necessary. 1. Check if there are missing lines in the pattern C or horizontal white streaks in the pattern D. A: No missing lines/No horizontal white streaks B: Lines are missing/Horizontal white streaks are present 2.
Page 90 If the pattern D or any color in the pattern C is not printed: (Example: Magenta pattern is not printed) The cleaning is required. Select Also B, then select Yes on the cleaning confirmation screen. The printer starts cleaning the print head. Cleaning the Print Head...
Page 91: Cleaning The Print Head
Cleaning the Print Head Clean the print head if lines are missing or if horizontal white streaks are present in the printed nozzle check pattern. Cleaning unclogs the nozzles and restores the print head condition. Cleaning the print head consumes ink, so clean the print head only when necessary. You need to prepare: a sheet of A4 or Letter-sized plain paper Check that printer is turned on.
Page 92 Note • If the problem is not resolved after cleaning the print head twice, clean the print head deeply.
Page 93: Deep Print Head Cleaning
Deep Print Head Cleaning If print quality does not improve by the standard cleaning of the print head, clean the print head deeply. Cleaning the print head deeply consumes more ink than the standard cleaning of the print head, so clean the print head deeply only when necessary.
Page 94 If the problem is not resolved, turn off the power and clean the print head deeply again after 24 hours. If the problem persists, replace the FINE cartridge. If the problem persists despite replacing the FINE cartridge, contact your nearest Canon service center to request a repair.
Page 95: Aligning The Print Head
Aligning the Print Head If printed ruled lines are misaligned or print results are otherwise unsatisfactory, adjust the print head position. Note • If the remaining ink level is low, the print head alignment sheet will not be printed correctly. Replace the FINE Cartridge whose ink is low.
Page 96 This takes about 4 to 5 minutes. Note • If automatic print head alignment fails, an error message appears on the LCD. When Error Occurred 8. When completion message appears, select OK. Note • If the print results are still not satisfactory after adjusting the print head position as described above, adjust the print head position manually.
Page 97: Aligning The Print Head Manually
Aligning the Print Head Manually Try aligning the print head manually after automatic print head alignment if printing results are not as expected, as when printed ruled lines are misaligned. Note • For details on automatic print head alignment, see Aligning the Print Head.
Page 98 9. Select OK. The input screen for head position alignment values is displayed. 10. Examine first patterns. In column A, find pattern in which streaks are least noticeable, select the number of that pattern, and then press the OK button. Note •...
Page 99 11. Repeat these steps for columns B to J. 12. Check message and press the OK button. The second set of patterns is printed. 13. Examine second patterns. In column K, find pattern in which streaks are least noticeable, select the number of that pattern, and then press the OK button. Note •...
Page 100 Note • If all patterns look different, choose the pattern in which horizontal stripes are least noticeable. Subtle horizontal stripes Noticeable horizontal stripes 17. Repeat these steps for columns O to T. 18. When completion message appears, select OK.
Page 101: Performing Maintenance Functions From Your Computer (Macos)
Performing Maintenance Functions from Your Computer (macOS) Opening Remote UI for Maintenance Cleaning the Print Heads Adjusting Print Head Position Checking Ink Status from Your Computer...
Page 102: Opening Remote Ui For Maintenance
Opening Remote UI for Maintenance You can perform maintenance of printer and change the settings from a Remote UI. The following is the procedure to open a Remote UI. 1. Open System Preferences, and select Printers & Scanners 2. Select your model from the printer list, and click Options & Supplies... 3.
Page 103: Cleaning The Print Heads
Cleaning the Print Heads The print head Cleaning and Deep Cleaning functions allow you to clear up clogged print head nozzles. Perform print head Cleaning if printing results are not satisfactory or if a specific color fails to print, even though there is enough ink.
Page 104 2. Click Deep Cleaning Before performing Deep Cleaning, check the following items: Check whether the printer is on and open the printer's cover. Check the following items for each ink. Then, if necessary, perform Deep Cleaning. • Is there ink remaining? •...
Page 105: Adjusting Print Head Position
Adjusting Print Head Position Any error in the print head installation position can cause color and line shifts. Adjusting the print head position improves print results. Print Head Alignment - Auto 1. Select Utilities from Remote UI 2. Click Print Head Alignment - Auto A message appears.
Page 106: Checking Ink Status From Your Computer
Checking Ink Status from Your Computer You can check the detailed information such as the remaining ink level and the FINE cartridge types of your model. If you select Printer status from Remote UI, the ink status appears as an illustration. Estimated ink levels You can check the types and levels of ink.
Page 107: Cleaning
Cleaning Cleaning Exterior Surfaces Cleaning Platen and Document Cover Cleaning Paper Feed Rollers Cleaning Inside the Printer (Bottom Plate Cleaning) Cleaning Cassette Pads...
Page 108: Cleaning Paper Feed Rollers
Cleaning Paper Feed Rollers If the paper feed roller is dirty or paper powder is attached to it, paper may not be fed properly. In this case, clean the paper feed roller. Cleaning will wear out the paper feed roller, so perform this only when necessary.
Page 109 The printer starts cleaning. The cleaning will be complete when the paper is ejected. 11. When the completion message appears, select OK. If the problem is not resolved after cleaning the paper feed roller, contact your nearest Canon service center to request a repair.
Page 110: Cleaning Inside The Printer (Bottom Plate Cleaning)
Cleaning Inside the Printer (Bottom Plate Cleaning) Remove stains from the inside of the printer. If the inside of the printer becomes dirty, printed paper may get dirty, so we recommend performing cleaning regularly. You need to prepare: a sheet of A4 or Letter-sized plain paper* * Be sure to use a new piece of paper.
Page 111 9. Load only this sheet of paper in the cassette with the ridges of the creases facing up and the edge of the half with no crease facing to the far side. 10. Mount cassette cover (A) and insert cassette into printer. 11.
Page 113: Overview
Overview Safety Safety Precautions Regulatory Information WEEE (EU & EEA) Handling Precautions Canceling Print Jobs Legal Restrictions on Scanning/Copying Printer Handling Precautions Transporting Your Printer When Repairing, Lending, or Disposing of the Printer Keeping Print Quality High Main Components and Their Use Main Components Power Supply LCD and Operation Panel...
Page 114: Safety
Safety Safety Precautions Regulatory Information WEEE (EU&EEA)
Page 115: Safety Precautions
Safety Precautions Safety Precautions • This manual contains important notices and safety precautions about your printer. Do not use the printer in ways other than described in the accompanying manuals, as this may result in fire, electric shock or other unexpected accidents. Safety standard marks and declarations are only valid for the supported voltages and frequencies in the applicable countries or regions.
Page 116 In case ink gets in contact with eyes, rinse with water immediately. In case ink gets in contact with skin, wash with soap and water immediately. If irritation to eyes or skin persists, obtain medical advice immediately. • Moving the printer Do not hold the printer by the cassette.
Page 117 • Do not place the printer on a thick rug or carpet. • Do not place the printer flush against a wall. Power Supply • Keep the area around the power outlet clear at all times so you can easily unplug the power cord if necessary.
Page 118: Regulatory Information
20cm between the radiator and persons body (excluding extremities: hands, wrists, feet and ankles) and must not be colocated or operated with any other antenna or transmitter. Canon U.S.A., Inc. One Canon Park Melville, New York 11747...
Page 119 Interference Do not use the printer around medical equipment or other electronic devices. Signals from the printer may interfere with the correct operation of these devices.
Page 120: Weee (Eu&Eea)
WEEE (EU&EEA) This regulation is only for European Union and EEA (Norway, Iceland and Liechtenstein). There is no information to inform here.
Page 121: Handling Precautions
Handling Precautions Canceling Print Jobs Legal Restrictions on Scanning/Copying Printer Handling Precautions Transporting Your Printer When Repairing, Lending, or Disposing of the Printer Keeping Print Quality High...
Page 122: Legal Restrictions On Scanning/Copying
Legal Restrictions on Scanning/Copying Scanning, printing, copying, or modifying copies of the following may be punishable under law. This list is non-exhaustive. When in doubt, check with a local legal representative. • Paper money • Money orders • Certificates of deposit •...
Page 123: Printer Handling Precautions
Printer Handling Precautions Do not place any object on the document cover! Do not place any object on the document cover. It will fall into the rear tray when the document cover is opened and cause the printer to malfunction. Also, place the printer where objects will not fall on it.
Page 124: Transporting Your Printer
Transporting Your Printer When relocating the printer for changing your living place or repairing it, make sure of the following. Important • Pack the printer in a sturdy box so that it is placed with its bottom facing down, using sufficient protective material to ensure safe transport.
Page 125 9. Attach the protective material to the printer when packing the printer in the box.
Page 126: When Repairing, Lending, Or Disposing Of The Printer
When Repairing, Lending, or Disposing of the Printer If you have entered personal data, passwords and/or other security settings on the printer, such information may be stored in the printer. When sending the printer for repair, lending or transferring the printer to another person, or disposing of the printer, please be sure to follow the steps below in order to delete such information and prevent third parties from accessing it.
Page 127: Keeping Print Quality High
Keeping Print Quality High The key to printing with the optimal printing quality is to prevent the print head from drying or clogging. Always observe the following rules for optimal printing quality. Note • Depending on the type of paper, ink may blur if you trace the printed area with a highlight pen or paint- stick, or bleed if water or sweat comes in contact with the printed area.
Page 128: Main Components And Their Use
Main Components and Their Use Main Components Power Supply LCD and Operation Panel Entering Numbers, Letters, and Symbols...
Page 129: Main Components
Main Components Front View Rear View Inside View Operation Panel...
Page 130: Front View
Front View A: Platen Load an original here. B: Document Cover Open to load an original on the platen. C: Operation Panel Use to change the settings of the printer or to operate it. The operation panel can be tilted. Operation Panel D: Cassette Load A4, B5, A5, or Letter-sized plain paper into the cassette, and insert it into the printer.
Page 131 H: Paper Output Support Open to support ejected paper. I: Status Bar Lights or flashes to indicate the printer is operating or when an error occurs. J: Paper Support Extend to load paper in the rear tray. K: Rear Tray Cover Open to load paper in the rear tray.
Page 132: Rear View
Rear View A: USB Port Plug in the USB cable to connect the printer with a computer. B: Power Cord Connector Plug in the supplied power cord. C: Transport Unit Cover Open when removing jammed paper. D: Rear Cover Detach when removing jammed paper. Important •...
Page 133: Inside View
Inside View A: Scanning Unit / Cover Scans originals. Also, lift and open it to replace a FINE cartridge or to remove jammed paper inside the printer. B: FINE Cartridge (ink cartridges) A replaceable cartridge that integrates print head and ink tank. C: Ink Cartridge Locking Cover Secures the installed FINE cartridge.
Page 134: Operation Panel
Operation Panel A: QR button/QR lamp When you press the QR button while the QR lamp is lit, the QR code will appear, giving you access to an online manual that explains the function that is in operation. Cost of connecting to Internet is to be born by the customer.
Page 135: Power Supply
Power Supply Checking that Power Is On Turning the Printer On and Off Checking the Power Plug/Power Cord Unplugging the Printer...
Page 136: Checking That Power Is On
Checking that Power Is On A screen appears in the LCD when the printer is turned on. Even if the display in the LCD is off, if the status bar is lit, the printer is on. Note • It may take a while for the printer to start printing immediately after you turn on the printer. •...
Page 137: Turning The Printer On And Off
Turning the Printer On and Off Turning on the printer 1. Press the ON button to turn on the printer. Confirming that the Power Is On Note • It may take a while for the printer to start printing immediately after you turn on the printer. •...
Page 138 Note • You can set the printer to automatically turn off when no operations are performed or no print jobs are sent to the printer for a certain interval. This feature is set to on by default. From the printer ECO settings From the computer For Windows:...
Page 139: Checking The Power Plug/Power Cord
Checking the Power Plug/Power Cord Unplug the power cord once a month to confirm that the power plug/power cord does not have anything unusual described below. • The power plug/power cord is hot. • The power plug/power cord is rusty. •...
Page 140: Unplugging The Printer
Unplugging the Printer To unplug the power cord, follow the procedure below. Important • Press the ON button and confirm that the status bar goes off and the display in the LCD disappears before unplugging the power cord. Unplugging the power cord while the status bar is lit/flashing or a screen is displayed in the LCD may cause drying or clogging of the print head and print quality may be reduced.
Page 141: Lcd And Operation Panel
LCD and Operation Panel Pressing the OK button (B) on the operation panel displays the menu screen, which enables you to perform printer settings and maintenance. Selecting a Menu or Setting Item In a menu screen or settings screen, use the button (C) to select an item or option, and then press the OK button (B) to proceed with the procedure.
Page 142 4. Select Prevent paper abrasion and press the OK button (B). 5. Use button (C) to change setting and press OK button (B). Network Status Indication When you press the OK button, icons depicting the Wi-Fi setting and the network status indicate by the icon in the standby screen.
Page 143 Signal strength: 50 % or less The problem such as the printer cannot print may occur. Place the printer near the wireless router. Wi-Fi is enabled but the printer is not connected to the wireless router. Note • Wireless Direct is enabled. •...
Page 144: Entering Numbers, Letters, And Symbols
Entering Numbers, Letters, and Symbols The buttons on the operation panel allow you to enter (or change) characters, numbers, or symbols when setting up the network or making other settings. Switching the Input Mode The current input mode appears at the upper right corner of the LCD. Pressing the (Wireless connect) button on the operation panel toggles through the input modes in the order lowercase...
Page 145 After all the characters have been input, press the Start button. • To insert a space Either press the OK button without selecting any character, or switch to the symbol mode and then press the button 5 times. • To delete characters Press the Stop button.
Page 146: Changing Settings
Changing Settings Changing Printer Settings from Your Computer (Windows) Changing Printer Settings from Your Computer (macOS) Changing Settings from Operation Panel...
Page 147: Changing Printer Settings From Your Computer (Macos)
Changing Printer Settings from Your Computer (macOS) Managing the Printer Power Changing the Printer Operation Mode...
Page 148: Managing The Printer Power
Managing the Printer Power Printer power supply is operated from Remote UI. Energy saving settings Energy saving settings allow you to set Auto power off and Auto power on. Auto power off is the function wherein the printer automatically turns itself off, when data is not sent or the printer remains inactive for a certain period.
Page 149: Changing The Printer Operation Mode
Changing the Printer Operation Mode If necessary, switch between various modes of printer operation. 1. Check whether the printer is on and select Printer settings from Remote UI 2. If necessary, complete the following settings: Print settings - Prevent paper abrasion The printer can increase the gap between the print head and the paper during high-density printing to prevent paper abrasion.
Page 150: Changing Settings From Operation Panel
Changing Settings from Operation Panel Changing Settings from Operation Panel Setting Items on Operation Panel Print settings LAN settings PictBridge settings Smartphone photo print settings Other device settings Language selection Firmware update Reset setting Feed settings Web service setup ECO settings Quiet setting System information...
Page 151: Changing Settings From Operation Panel
Changing Settings from Operation Panel This section describes the procedure to change the settings in the Device settings screen, taking the steps to specify Amount of extension as an example. Check that printer is turned on. 2. Press OK button. 3.
Page 152 Setting Items on Operation Panel...
Page 153: Setting Items On Operation Panel
Setting Items on Operation Panel Items for Printer Other device settings Language selection Web service setup ECO settings Quiet setting Items for Paper/Printing Print settings PictBridge settings Smartphone photo print settings Feed settings Items for Maintenance/Management LAN settings Firmware update Reset setting System information...
Page 154: Print Settings
Print settings Select this setting item from Device settings in the menu screen which appears when you press the OK button. • Prevent paper abrasion Use this setting only if the print surface becomes smudged. Important • Be sure to set this back to OFF after printing since it may result in lower printing speed or lower print quality.
Page 155: Lan Settings
LAN settings Select this setting item from Device settings in the menu screen which appears when you press the OK button. Wi-Fi Wireless Direct Wi-Fi By selecting Wi-Fi from LAN settings, the following settings are available. To print the LAN settings, select Print details in the LAN settings and select Yes. Printing Network Settings Important •...
Page 156 • Advanced mode Enables/disables Wi-Fi. • Wi-Fi setup Selects the setup method for Wi-Fi connection. ◦ Easy wireless connect Select if you specify the settings of the access point information to the printer directly from a device (e.g. smartphone, or tablet) without operating the wireless router. Follow the on-screen instructions of the connecting device for the setup procedure.
Page 157 Connection Enabled (connected)/Disabled Network name(SSID) DIRECT-XXXXXXXXX XXXXXXXXXXXXXXXX (up to 32 characters) Password XXXXXXXXXX (10 characters) Wi-Fi security WPA2-PSK(AES) No. of devices connected now XX/XX IPv4 address XXX. XXX. XXX. XXX (12 characters) IPv4 subnet mask XXX. XXX. XXX. XXX (12 characters) IPv4 default gateway XXX.
Page 158 Advanced • Set printer name Specifies the printer name. You can use up to 15 characters for the name. Note • You cannot use the same printer name as that already used for other LAN connected devices. • You cannot use a hyphen for the initial or last character of the printer name. •...
Page 159 Enables/disables LLMNR (Link-Local Multicast Name Resolution). Selecting Enable allows the printer to detect printer's IP address from the printer name without a DNS server. • IPP settings Selecting Enable allows you to print via the network with the IPP protocol. •...
Page 160: Other Device Settings
◦ Brightness Adjusts the brightness of the status bar. • Wi-Fi pairing settings In order to connect Canon PRINT Inkjet/SELPHY, multiple configurations will be performed. ◦ Enable/disable pairing Set the printer's Wi-Fi pairing function to enable or disable. ◦ Allow/block additional pairing On another function permit or prohibit Canon PRINT Inkjet/SELPHY pairing.
Page 161: Language Selection
Language selection Changes the language for the messages and menus on the LCD. Japanese / English / German / French / Italian / Spanish / Portuguese / Dutch / Danish / Norwegian / Swedish / Finnish / Russian / Ukrainian / Polish / Czech / Slovene / Hungarian / Slovak / Croatian / Romanian / Bulgarian / Turkish / Greek / Estonian / Latvian / Lithuanian / Simplified Chinese / Korean / Traditional Chinese / Thai / Indonesian / Vietnamese...
Page 162: Firmware Update
Firmware update Select this setting item from Device settings in the menu screen which appears when you press the OK button. You can update the firmware of the printer, check the firmware version, or perform settings of a notification screen, a DNS server and a proxy server. Important •...
Page 163: Reset Setting
Reset setting Select this setting item from Device settings in the menu screen which appears when you press the OK button. You can set the settings back to the default. • Web service setup only Sets the Web service settings back to the default. •...
Page 164: Feed Settings
Feed settings Select this setting item from Device settings in the menu screen which appears when you press the OK button. By registering the paper size and the media type loaded on the rear tray or in the cassette, you can prevent the printer from misprinting by displaying the message before printing starts when the paper size or the media type of the loaded paper differs from the print settings.
Page 165: Web Service Setup
Registers/Deletes the printer to/from Canon Inkjet Cloud Printing Center. ◦ Check Web service setup Make sure whether the printer is registered to Canon Inkjet Cloud Printing Center. • Issue registration code In order to link the web service and printer, obtain the registration code from the service origin.
Page 166: Eco Settings
ECO settings This setting allows you to use automatic duplex printing as a default to save paper and to turn on/off the printer automatically to save electricity. Using Power Saving Function Using Duplex Printing Using Power Saving Function Follow the procedure below to use power saving function. Check that printer is turned on.
Page 167 2. Press the OK button. 3. Select Device settings. 4. Select Other device settings. 5. Select ECO settings. 6. Select Two-sided print settings. A confirmation screen will appear when the default setting for copying is set for two-sided printing. 7. Select ON or OFF to turn on/off two-sided printing.
Page 168: Quiet Setting
Quiet setting Enables this function on the printer if you want to reduce the operating noise, such as when printing at night. Follow the procedure below to perform setting. Check that printer is turned on. 2. Press the OK button. 3.
Page 169: System Information
System information Select this setting item from System information in the menu screen which appears when you press the OK button. • Current version Displays the current firmware version. • Printer name Displays the printer name currently specified. • Serial number Displays the printer serial number.
Page 170: Specifications
Specifications General Specifications Interface USB Port: Hi-Speed USB * Network Port: Wi-Fi: IEEE802.11n / IEEE802.11g / IEEE802.11b * A computer that complies with Hi-Speed USB standard is required. Since the Hi-Speed USB interface is fully upwardly compatible with USB 1.1, it can be used at USB 1.1.
Page 171 Scan Specifications Scanner driver Windows: TWAIN 1.9 Specification, WIA Maximum scanning size A4/Letter, 8.5 x 11.7 in. (216 x 297 mm) Optical resolution (horizontal x 1200 x 2400 dpi * vertical) * Optical Resolution represents the maximum sampling rate based on ISO 14473.
Page 172 10.12.6 - macOS 10.15 Other Supported OS iOS, iPadOS, Android, Chrome OS Some functions may not be available with the supported OS. Refer to the Canon web site for details. Information in this manual is subject to change without notice.
Page 173: Information About Paper
Information about Paper Supported Media Types Paper Load Limit Unsupported Media Types Handling Paper Print Area...
Page 174: Supported Media Types
Canon website. • Genuine Canon paper is not available in some countries or regions. Note that in the United States, Canon paper is not sold by model number. Instead, purchase paper by name.
Page 175 • Light Fabric Iron-on Transfers <LF-101> • Dark Fabric Iron-on Transfers <DF-101> • Double sided Matte Paper <MP-101D> Paper other than genuine Canon paper • Plain Paper (including recycled paper) • Envelopes • T-Shirt Transfers • Greeting Card • Card Stock...
Page 176 • Hagaki • Hagaki 2 • Envelope Com 10 • Envelope DL • Nagagata 3 • Nagagata 4 • Yougata 4 • Yougata 6 • Card 2.17"x3.58" Special sizes • Minimum size: 2.17 x 3.51 in. (55.0 x 89.0 mm) •...
Page 177: Paper Load Limit
Note • Page sizes and media types differ depending on the country or region where the paper is sold. For details on page sizes and media types, access the Canon website. Paper Load Limits of Rear Tray and Cassette Genuine Canon Paper Paper for printing documents: Media Name <Model No.>...
Page 178 Light Fabric Iron-on Transfers <LF-101> Dark Fabric Iron-on Transfers <DF-101> Double sided Matte Paper <MP-101D> Paper other than Genuine Canon Paper Common Name Rear Tray Cassette Plain Paper (including recycled paper)*1 Approx. 100 sheets (Legal: Approx. 100 sheets 10 sheets)
Page 179: Unsupported Media Types
Unsupported Media Types Do not use the following types of paper. Using such paper will cause not only unsatisfactory results, but also the printer to jam or malfunction. • Folded, curled, or wrinkled paper • Damp paper • Paper thinner than a postcard, including plain paper or notepad paper cut to a small size (when printing on paper smaller than A5) •...
Page 180: Handling Paper
Handling Paper • Be careful not to rub or scratch the surfaces of any types of paper when handling. • Hold the paper as closely as possible to its edges and try not to touch the printing surface. The print quality may be degraded if the printing surface is smudged with sweat or oil that comes from your hands.
Page 181: Printing
Printing Printing from Computer Printing from Smartphone/Tablet Printing from Digital Camera Using PIXMA/MAXIFY Cloud Link Paper Settings...
Page 182: Printing From Computer
Printing from Computer Printing from Application Software (Windows Printer Driver) Printing from Application Software (macOS AirPrint) Printing Using Canon Application Software Printing from Chrome OS...
Page 183: Printing From Application Software (Macos Airprint)
Printing from Application Software (macOS AirPrint) Printing Basic Perform Borderless Printing Printing on Postcards Adding Printer How to Open Printer Settings Screen Displaying the Printing Status Screen Deleting the Undesired Print Job Removing Printer That Is No Longer Required from List of Printers...
Page 184: Printing
Printing This printer is compatible with the macOS standard printing system (AirPrint). You can start printing right away after connecting this printer to your Mac without installing any special software. Checking Your Environment First, check your environment. • AirPrint Operation Environment Mac running the latest version of OS •...
Page 185 Note • Click Show Details to switch the setup window to the detailed display. 6. Check print settings Set items such as Paper Size to the appropriate size, as well as Feed from and Media Type from Media & Quality of the pop-up menu. Remove the Two-Sided check mark if you are not printing on both sides of the paper.
Page 186 position differs depending on Media Type. If Media Type is set to plain paper, it is fed from the cassette (main tray). If set to other types of paper, it is fed from the rear tray. • If printing paper such as photo paper and postcards that cannot be printed on both sides, uncheck the Two-Sided checkbox.
Page 187: Perform Borderless Printing
Perform Borderless Printing The borderless printing function allows you to print data without any margin by enlarging the data so that it extends slightly off the paper. In standard printing, margins are created around the document area. However, in borderless printing function, these margins are not created. When you want to print data such as a photo without providing any margin around it, set borderless printing.
Page 188 Important • Borderless printing only supports specific paper sizes. Make sure to select a paper size with the wording "Borderless" from the Paper Size. • Print quality may deteriorate or the sheet may be stained at the top and bottom depending on the type of paper used.
Page 189: Printing On Postcards
Printing on Postcards This section describes the procedure for printing on postcards. Load postcards in printer 2. Select paper size and paper type from the printer Register Hagaki (size) for paper size from the printer operation panel. Also, register IJ Hagaki, Hagaki K, or Hagaki (type) for paper type, according to your purpose. When you print on the address side, register Hagaki (type).
Page 190 Important • Two-sided printing is not possible for postcards, so remove the Two-Sided check mark. If you print with the Two-Sided check mark on, the printing result may not be as you intended. • You will get cleaner printing if you print the message side first and then print the address side. 5.
Page 191: Adding Printer
Adding Printer Procedure for adding printer to your Mac is explained. To re-add a printer that was deleted, open System Preferences -> Printers & Scanners, click + next to the printer list, and then perform the procedure described below. If your printer is connected via USB, and you connect the USB cable to a Mac, the printer is automatically added.
Page 192: How To Open Printer Settings Screen
How to Open Printer Settings Screen The settings screen of the printer can be displayed from your application software. Opening the Page Setup Dialog Use this procedure to set the page (paper) settings before printing. 1. Select Page Setup... from the File menu of the application software The Page Setup dialog opens.
Page 193: Displaying The Printing Status Screen
Displaying the Printing Status Screen Check the print progress according to the following procedure: 1. Launch the printing status screen • If the print data has been sent to the printer The printing status screen opens automatically. To display the printing status screen, click the (the printer icon) displayed on the Dock.
Page 194: Deleting The Undesired Print Job
Deleting the Undesired Print Job If the printer does not start printing, canceled or failed print job data may be remaining. Delete unnecessary print jobs from the print status check screen. 1. Open System Preferences, and select Printers & Scanners 2.
Page 195: Removing Printer That Is No Longer Required From List Of Printers
Removing Printer That Is No Longer Required from List of Printers The printer that is no longer in use can be removed from the list of printers. Before removing the printer, remove the cable connecting the printer and PC. You cannot remove the printer if not logged in as the administrator. For information about an administrative user, see Users &...
Page 196: Printing Using Canon Application Software
Printing Using Canon Application Software Easy-PhotoPrint Editor Guide...
Page 197: Printing From Smartphone/Tablet
Printing from Smartphone/Tablet Printing from iPhone/iPad/iPod touch (iOS) Printing from Smartphone/Tablet (Android)
Page 198: Paper Settings
Paper Settings By registering the paper size and the media type loaded on the rear tray or in the cassette, you can prevent the printer from misprinting by displaying the message before printing starts when the paper size or the media type of the loaded paper differs from the print settings.
Page 199 • When you insert the cassette: Paper size is detected and set automatically in the printer. * You can load only plain paper in the cassette. Important • For more on the proper combination of paper settings you can specify by the printer driver (Windows) or on the LCD: Paper Settings on the Printer Driver and the Printer (Media Type) Paper Settings on the Printer Driver and the Printer (Paper Size)
Page 200 Check the message and select Next. When the screen to select the operation is displayed, select one of the operations below. Note • Depending on the setting, the choices below may not be displayed. Print on set paper Select if you want to print on the paper loaded without changing the paper settings. For example, when the paper setting for printing is A5 and the paper information registered to the printer is A4, the printer starts printing on the paper loaded in the rear tray or in the cassette without changing the paper size setting for printing.
Page 201 Feed settings • When you print from Windows: The message which prevents misprinting is disabled by default. To change the setting: Changing the Printer Operation Mode • When you print from macOS: The message which prevents misprinting is enabled by default. To change the setting: Changing the Printer Operation Mode Important...
Page 202: Copying
Copying Reducing/Enlarging Copies Making Copies Basics Two-Sided Copying Special Copy Menu Copying Using Smartphone or Tablet...
Page 203: Making Copies
Making Copies This section describes the basic procedure to perform standard copying. Check that printer is turned on. Load paper. Load original document on platen. 4. Confirm the page size and color mode. Note • To change the paper position, color mode and other settings, press the OK button. Select Copy settings to display the desired setting item.
Page 204: Setting Items For Copying
Setting Items for Copying You can change the copy settings such as the page position, color mode, and intensity. Press the OK button and select Copy settings. Use the button to set the number of copies, paper source, color mode, then press the OK button. Use the button to select Others when adjusting other settings, then press the OK button.
Page 205 Select whether to perform duplex copying. Two-Sided Copying Note This item appears when A4 or Letter is selected. ◦ Layout Select whether to copy two pages onto a single page. Copying Two Pages onto Single Page Note This item appears when A4 or Letter is selected. •...
Page 206: Scanning
Scanning Scanning from Computer (Windows) Scanning from Computer (macOS)
Page 207: Scanning From Computer (Macos)
Scanning from Computer (macOS) Scanning According to Item Type or Purpose (IJ Scan Utility Lite) IJ Scan Utility Lite Features Scanning Easily (Auto Scan) Basics Scanning Documents and Photos Scanning Tips Positioning Originals (Scanning from Computer) Important • Available functions and settings vary depending on your scanner or printer.
Page 208: Scanning According To Item Type Or Purpose (Ij Scan Utility Lite)
Scanning According to Item Type or Purpose (IJ Scan Utility Lite) IJ Scan Utility Lite Features Scanning Easily (Auto Scan) Basics Scanning Documents and Photos Important • Available functions and settings vary depending on your scanner or printer.
Page 209: Ij Scan Utility Lite Features
IJ Scan Utility Lite Features Use IJ Scan Utility Lite to scan and save documents, photos, or other items at one time by simply clicking the corresponding icon. Important • The displayed items and available functions vary depending on your scanner or printer. Multiple Scanning Modes Auto allows for one click scanning with default settings for various items.
Page 210 Note • To set the applications to integrate with, see Settings Dialog.
Page 211: Scanning Easily (Auto Scan)
Scanning Easily (Auto Scan) Auto Scan allows for automatic detection of the type of the item placed on the platen or ADF (Auto Document Feeder). Important • This function is not supported depending on your model. • The following types of items may not be scanned correctly. In that case, adjust the cropping frames (selection boxes;...
Page 212 Scanning Multiple Documents at One Time from the ADF (Auto Document Feeder)
Page 213: Scanning Documents And Photos
Scanning Documents and Photos Scan items placed on the platen with settings suitable for documents or photos. Save documents in formats such as PDF and JPEG, and photos in formats such as JPEG and TIFF. 1. Place the item on the platen. Positioning Originals (Scanning from Computer) 2.
Page 214: Scanning Tips
Scanning Tips Positioning Originals (Scanning from Computer)
Page 215: Positioning Originals (Scanning From Computer)
Positioning Originals (Scanning from Computer) This section describes how to load originals on the platen or ADF (Auto Document Feeder) for scanning. If items are not placed correctly they may not be scanned correctly. Important • Be sure to observe the following when loading the original on the platen. Failure to observe the following may cause the scanner to malfunction or the platen glass to break.
Page 216 of the platen and the item. Portions placed on the diagonally striped area cannot be scanned. Important • Inkjet All-In-One printer: Important For the portions in which items cannot be scan- • Large items (such as A4 size photos) that cannot be ned, click Home to return to the top page of the placed away from the edges/arrow (alignment mark) of Online Manual for your model and search for...
Page 217 1. Make sure any original has been removed from platen. 2. Open document tray (A). 3. Slide the document guide (B) all the way out. 4. Load document with side to scan facing up in document tray. Insert the document until it stops. 5.
Page 218 Note • When scanning duplex documents, place the front sides facing up. They will not be scanned correctly if placed the other way around. Placing Items (When Using Stand) 1. Place item on platen. 1. Open the document cover. 2. Place the item with the side to scan facing the platen, and then align it with the alignment mark.
Page 219 2. Gently close document cover. While scanning, hold the document cover gently with your hand to keep it closed. Important • Keep these points in mind when using the scanner in the upright position. Do not subject the scanner to vibration during operation. The correct image results may not be obtained (for example, images may blur).
Page 220: Frequently Asked Questions
Frequently Asked Questions Cannot Find Printer on Network Cannot Find Printer while Using Wi-Fi Network Key (Password) Unknown Network Cannot Print or Connect For other questions about network, click here. Printer Does Not Print Printouts Are Blank/Blurry or Fuzzy/Inaccurate or Bleeding Colors/Streaks or Lines Printout Results Are Unsatisfactory Print What to Do When Paper Is Jammed...
Page 221 Scanning Problems (Windows) Scanning Problems (macOS) Scan Results Are Unsatisfactory (Windows) Scan Results Are Unsatisfactory (macOS) Cannot Print/Scan from Smartphone/Tablet Cannot Set Correctly (Network) Cannot Find Printer During Setup Cannot Find Printer while Using Wi-Fi Printer Suddenly Stopped Working for Some Reason Network Key (Password) Unknown Forgot Administrator Password of Printer Printer Cannot Be Used After Replacing Wireless Router or Changed Router Settings...
Page 222: Network Settings And Common Problems
Network Settings and Common Problems Here are frequently asked questions on network. Select a connection method you are using, or you want to use. Wireless LAN Wireless Direct Wireless LAN Cannot Find Printer Cannot Find Printer while Using Wi-Fi Cannot Find Printer During Setup Cannot Proceed beyond Printer Connection Screen (Cannot Find Printer Connected via USB) Searching Printer by IP Address or Host Name During Setup Error Occurs During Wi-Fi Setup...
Page 223 Cannot Connect Smartphone/Tablet to Wireless Router Checking Wireless Router Network Name (SSID) for Smartphone/Tablet Setting Up Using Smartphone/Tablet Cannot Print/Scan from Smartphone/Tablet Downloading Canon PRINT Inkjet/SELPHY Problems while Using Printer Message Appears on Computer During Setup Printer Prints Slowly No Ink Level Appears in Printer Status Monitor (Windows)
Page 224: Network Communication Problems
Network Communication Problems Cannot Find Printer on Network Network Connection Problems Other Network Problems...
Page 225: Cannot Find Printer On Network
Cannot Find Printer on Network Cannot Find Printer During Setup While using printer: Cannot Find Printer while Using Wi-Fi...
Page 226: Cannot Find Printer During Setup
Cannot Find Printer During Setup If you cannot find the printer on network during setup, check the following. When you complete all the checking, try to set up from the beginning. Items to check for Wi-Fi: When connecting the printer to Wi-Fi, check/respond to all the items in [Step 1], and try to set up from the beginning.
Page 227 It may take a while for the network device to become ready for use once they are turned on. Proceed once the network devices such as router are ready for use. 2. Check if the printer is turned on If printer is not turned on, turn on the power. If the printer is on, turn them off and on again. Proceed once you complete checking the power status above.
Page 228 If the printer cannot be detected after trying to set up from the beginning, proceed to [Step 2]. Solve the Problem, Using IJ Network Device Setup Utility Step 2 Diagnose and repair the network connections using IJ Network Device Setup Utility. Download IJ Network Device Setup Utility from the below page, and install it on your computer.
Page 229: Cannot Proceed Beyond Printer Connection Screen (Cannot Find Printer Connected Via Usb)
Cannot Proceed beyond Printer Connection Screen (Cannot Find Printer Connected via USB) If you cannot proceed beyond the Printer Connection screen, check the following. Make sure USB cable is securely plugged in to printer and computer. Check1 Connect the printer and the computer using a USB cable as the illustration below. The USB port is located at the back of the printer.
Page 230 2. Turn off printer. 3. Shut down computer. After shutting down, restart your computer and install the latest MP Drivers downloaded in step 1.
Page 231: Cannot Find Printer While Using Wi-Fi
Cannot Find Printer while Using Wi-Fi First, make sure printer is turned on. Next, make sure that you can view any web page on the Internet with your computer. After confirming the two, use the IJ Network Device Setup Utility to diagnose and repair network status.
Page 232 Make sure security software's firewall is off. Check7 If your security software's firewall is on, a message may appear warning you that Canon software is attempting to access the network. If this warning message appears, set security software to always allow access.
Page 233: Network Connection Problems
Network Connection Problems Printer Suddenly Stopped Working for Some Reason Network Key (Password) Unknown Printer Cannot Be Used After Replacing Wireless Router or Changed Router Settings...
Page 234: Printer Suddenly Stopped Working For Some Reason
Printer Suddenly Stopped Working for Some Reason First, make sure printer is turned on. Next, make sure that you can view any web page on the Internet with your computer. After confirming the two, use the IJ Network Device Setup Utility to diagnose and repair network status.
Page 235 Is the printer connected to the wireless router? Check2 Use the icon on the LCD when OK button is pressed to check the connection status between the printer and wireless router. If the icon is not displayed, Wi-Fi is disabled. Turn on wireless communication on the printer.
Page 236 Make sure security software's firewall is off. Check8 If your security software's firewall is on, a message may appear warning you that Canon software is attempting to access the network. If this warning message appears, set security software to always allow access.
Page 237 Printing Network Settings Have you entered the proper password specified for the Wireless Direct? Check4 To check the password specified for the printer, display it using the operation panel of the printer or print out the network setting information of the printer. •...
Page 238: Network Key (Password) Unknown
Network Key (Password) Unknown Use the IJ Network Device Setup Utility to diagnose and repair network status. Select the link below to download IJ Network Device Setup Utility and install it. Checking Printer Connection Status Using IJ Network Device Setup Utility See below for starting up IJ Network Device Setup Utility.
Page 239 Either TKIP (basic encryption) or AES (secure encryption) is selected automatically as the dynamic encryption method. For details, see If WPA/WPA2 Details Screen Appears. Note • This printer supports WPA/WPA2-PSK (WPA/WPA2-Personal) and WPA2-PSK (WPA2- Personal). • Using WEP The length or format of the Wi-Fi password and authentication method must be identical among the wireless router, the printer, and your computer.
Page 240: Printer Cannot Be Used After Replacing Wireless Router Or Changed Router Settings
Printer Cannot Be Used After Replacing Wireless Router or Changed Router Settings When you replace a wireless router, redo the network setup for the printer according to the replaced one. Click here and perform setup. Note • IJ Network Device Setup Utility allows you to diagnose and repair the network status. Select the link below to download IJ Network Device Setup Utility and install it.
Page 241 If using WPA/WPA2 key or a password, make sure encryption key for Check3 computer, network device, and printer matches key set for wireless router. The length or format of the Wi-Fi password and authentication method must be identical among the wireless router, the printer, and your computer.
Page 242: Other Network Problems
Other Network Problems Checking Network Information Restoring to Factory Defaults...
Page 243: Checking Network Information
Printing Network Settings For Windows, you can check the network setting information on the computer screen. Canon IJ Network Device Setup Utility Screen Checking Computer IP Address or MAC Address To check the IP Address or MAC address of your computer, follow the instructions below.
Page 244 3. Click TCP/IP to check the IP address, or click Hardware to check the MAC address. Checking Communication Between the Computer, the Printer, and the Wireless Router Perform a ping test to check if communication is taking place. • For Windows: 1.
Page 245 3 packets transmitted, 3 packets received, 0% packet loss If "100% packet loss" appears, communication is not taking place. Otherwise, computer is communicating with target device. Checking Network Setting Information To check the printer's network settings information, print out the network settings information or use the operation panel to display it.
Page 246: Restoring To Factory Defaults
Restoring to Factory Defaults Important • Initialization erases all network settings on the printer, making printing or scanning operation from a computer over a network impossible. To use the printer over a network again after restoring it to the factory defaults, click here and redo setup. Initialize the network setting using the printer's operation panel.
Page 247: Problems While Printing/Scanning From Smartphone/Tablet
Problems while Printing/Scanning from Smartphone/Tablet Cannot Print/Scan from Smartphone/Tablet...
Page 248: Cannot Print/Scan From Smartphone/Tablet
Cannot Print/Scan from Smartphone/Tablet If you cannot print/scan from your smartphone/tablet, it is possible that your smartphone/tablet cannot communicate with the printer. Check the cause of your problem according to the connection method. Cannot Communicate with Printer over Wireless LAN Cannot Communicate with Printer while It Is in Wireless Direct Note •...
Page 249 To check the current network settings of the printer, print out the network setting information of the printer. Printing Network Settings Note • If you have a computer, IJ Network Device Setup Utility allows you to diagnose and repair the network status.
Page 250 Cannot Communicate with Printer while It Is in Wireless Direct If your smartphone/tablet cannot communicate with the printer in the Wireless Direct, check the following. Check the power status of printer and other devices (smartphone or tablet). Check1 Turn on the printer or devices. If the power is already turned on, cycle the power switch.
Page 251 If the distance between the printer and device is too far, wireless communication becomes poor. Place the printer and device close to each other. Make sure 5 devices are already connected. Check7 Wireless Direct does not allow more than 5 devices to be connected.
Page 252: Printing Problems
Printing Problems Printer Does Not Print Ink Does Not Come Out Printer Does Not Pick up or Feed the Paper/"No Paper" Error Printout Results Are Unsatisfactory...
Page 253: Printer Does Not Print
Printer Does Not Print Make sure printer is turned on. Check1 Make sure the status bar or LCD is lit. If not, make sure the printer is securely plugged in and press ON button to turn on. Note • If you are printing large data such as photos or other graphics, printing may take longer to start. Wait until printing starts.
Page 254 The printer will not print properly if you are using a printer driver for a different printer. • For Windows: Make sure "Canon XXX series" (where "XXX" is your printer's name) is selected in the Print dialog box. Note • If multiple printers are registered to your computer, set your printer as default printer to make the one selected by default.
Page 255 Important • Selecting On for Prevention of Print Data Loss may reduce print quality. • After printing is completed, select Off for Prevention of Print Data Loss. If printing from your computer, restart the computer. Check8 Restart the computer and try printing again.
Page 256: Ink Does Not Come Out
Ink Does Not Come Out Make sure of the estimated ink levels in the FINE cartridges. Check1 When a FINE cartridge runs out of ink, replace empty FINE cartridges with a new one. Checking Ink Status on the LCD Replacing a FINE Cartridge Is the FINE cartridge installed properly? Check2 •...
Page 257 After cleaning the print head, print the nozzle check pattern and check the result. • For Windows: Clean the print head • For macOS: Clean the print head If it does not improve, go to the next step. Clean the print head again. Step3 After cleaning the print head again, print the nozzle check pattern and check the result.
Page 258: Printer Does Not Pick Up Or Feed The Paper/"No Paper" Error
Printer Does Not Pick up or Feed the Paper/"No Paper" Error Make sure paper is loaded. Check1 Loading Paper When loading paper, consider the following. Check2 • When loading two or more sheets of paper, align the edges of the sheets before loading the paper. •...
Page 259 If the paper tears in the rear tray, see What to Do When Paper Is Jammed to remove it. If there are any foreign objects in the rear tray, be sure to turn off the printer, unplug it from the power supply, then remove the foreign object.
Page 260 Rear View for the positions of the transport unit cover and the rear cover. If the measures above do not solve the problem, contact your nearest Canon service center to request a repair.
Page 261: Printout Results Are Unsatisfactory
Check the settings on your PictBridge (Wi-Fi) compliant device or the operation panel. PictBridge (Wi-Fi) Print Settings PictBridge settings • Printing from your smartphone/tablet using Canon PRINT Inkjet/SELPHY Check the settings on Canon PRINT Inkjet/SELPHY. Print Photos from Your Smartphone Make sure appropriate print quality is selected (see list above).
Page 262 Note • When printing from a PictBridge (Wi-Fi) compliant device, set the print quality setting using the operation panel. This setting cannot be made on the PictBridge (Wi-Fi) compliant device. If problem is not resolved, check also the sections below. Check3 See also the sections below: Printouts Are Blank/Blurry or Fuzzy/Inaccurate or Bleeding Colors/Streaks or Lines...
Page 263: Printouts Are Blank/Blurry Or Fuzzy/Inaccurate Or Bleeding Colors/Streaks Or Lines
Printouts Are Blank/Blurry or Fuzzy/Inaccurate or Bleeding Colors/ Streaks or Lines Printing Is Blurry Colors Are Wrong...
Page 264 White Streaks Appear Check paper and print quality settings. Check1 Printout Results Are Unsatisfactory Make sure of the estimated ink levels in the FINE cartridges. Check2 When a FINE cartridge runs out of ink, replace empty FINE cartridges with a new one. Checking Ink Status on the LCD Replacing a FINE Cartridge Is the FINE cartridge installed properly?
Page 265 Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzles. Print the nozzle check pattern. Step1 After printing the nozzle check pattern, examine the pattern. • For Windows: Printing a Nozzle Check Pattern •...
Page 266 Refer to the instruction manual supplied with the paper for detailed information on the printable side. • When copying, see also the sections below: Is platen glass dirty? Check6 Clean the platen glass. Cleaning Platen and Document Cover Make sure original is properly loaded on platen. Check7 When you load the original on the platen, load it with the side to be copied facing down.
Page 267: Colors Are Unclear
Colors Are Unclear Is nozzle check pattern printed properly? Check1 Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzles. Print the nozzle check pattern. Step1 After printing the nozzle check pattern, examine the pattern. •...
Page 268 Replacing a FINE Cartridge For details on printing the nozzle check pattern, print head cleaning, and print head deep cleaning, see If Printing Is Faint or Uneven. Make sure of the estimated ink levels in the FINE cartridges. Check2 When a FINE cartridge runs out of ink, replace empty FINE cartridges with a new one. Checking Ink Status on the LCD Replacing a FINE Cartridge Is FINE cartridge installed properly?
Page 269: Lines Are Misaligned/Distorted
Lines Are Misaligned/Distorted Check paper and print quality settings. Check1 Printout Results Are Unsatisfactory Perform print head alignment. Check2 If printed lines are misaligned/distorted or print results are otherwise unsatisfactory, adjust the print head position. Aligning the Print Head Note •...
Page 270: Paper Is Smudged / Printed Surface Is Scratched
Paper Is Smudged / Printed Surface Is Scratched Paper Is Smudged Smudged Edges Smudged Surface Printed Surface Is Scratched Check paper and print quality settings. Check1 Printout Results Are Unsatisfactory Check paper type. Check2 Make sure you are using the right paper for what you are printing. Supported Media Types Correct curl before loading paper.
Page 271 1. Roll up paper in opposite direction to paper curl as shown below. 2. Check that paper is now flat. We recommend printing curl-corrected paper one sheet at a time. Note • Depending on paper type, the paper may smudge or may not feed properly even if it is not curled inward. Follow the instructions below to curl the paper outward up to 0.1 in.
Page 272 • From computer (Windows): 1. Check that printer is turned on. 2. Open Canon IJ Printer Assistant Tool. Opening the Maintenance Tool (Canon IJ Printer Assistant Tool) 3. Select Custom Settings. 4. Select Prevents paper abrasion check box and select OK.
Page 273 1. Check that printer is turned on. 2. Open Canon IJ Printer Assistant Tool. Opening the Maintenance Tool (Canon IJ Printer Assistant Tool) 3. Select Custom Settings. 4. Drag Ink Drying Wait Time slide bar to set the wait time and select OK.
Page 274: Vertical Line Next To Image
Vertical Line Next to Image Is loaded paper size correct? Check If the loaded paper is larger than the size you specified, vertical lines (A) may appear in the left margin or the both margin. Set the paper size to match the loaded paper. Printout Results Are Unsatisfactory Note •...
Page 275: Scanning Problems (Macos)
Scanning Problems (macOS) Scanning Problems...
Page 276: Scanning Problems
Scanning Problems Scanner Does Not Work Scanner Driver Does Not Start...
Page 277: Scanner Does Not Work
Scanner Does Not Work Check that your scanner or printer is turned on. Check 1 With network connection, check the connection status and reconnect as Check 2 needed. With USB connection, connect the USB cable to a different USB port on the Check 3 computer.
Page 278: Scanner Driver Does Not Start
Scanner Driver Does Not Start Make sure the application software supports AirPrint. Check 1 Select your scanner or printer on the application's menu. Check 2 Note • The operation may differ depending on the application. Scan and save images with IJ Scan Utility Lite and open the files in your Check 3 application.
Page 279: Mechanical Problems
Mechanical Problems Printer Does Not Turn On Printer Turns Off Unexpectedly or Repeatedly USB Connection Problems Cannot Communicate with Printer via USB Wrong Language Appears in LCD...
Page 280: Printer Does Not Turn On
The Power Cord Connector is slightly diagonal. Unplug printer, leave it for at least 2 minutes, and then plug it back in and turn Check3 on again. If this does not solve the problem, contact your nearest Canon service center to request a repair.
Page 281: Printer Turns Off Unexpectedly Or Repeatedly
The setting to shut off the power automatically is disabled. • To disable the setting from the computer: For Windows, use Canon IJ Printer Assistant Tool or ScanGear (scanner driver) to disable the setting. Follow the procedure below to disable the setting using Canon IJ Printer Assistant Tool.
Page 282 4. Select OK. 5. Select OK on the displayed screen. The setting to shut off the power automatically is disabled. Note • See below for details on how to disable the setting from ScanGear (scanner driver). Scanner Tab...
Page 283: Usb Connection Problems
USB Connection Problems Make sure of the checking item below when you find one of the followings. • Printing or scanning is slow. • Hi-Speed USB connection does not work. • A message such as "This device can perform faster" appears. (Windows) Note •...
Page 284: Cannot Communicate With Printer Via Usb
Cannot Communicate with Printer via USB Make sure printer is turned on. Check1 Connect USB cable properly. Check2 As the illustration below, the USB port is at the back of the printer. Important • Check the orientation and insertion angle of the "Type-B" connector and connect to the printer. The USB Port is slightly diagonal.
Page 285: Wrong Language Appears In Lcd
Wrong Language Appears in LCD Follow the instructions below to select your language. 1. Press Back button repeatedly until the HOME screen is displayed. 2. Press OK button on HOME screen. 3. Press button 3 times and press OK button. 4.
Page 286: Installation And Download Problems
Installation and Download Problems Failed to MP Drivers Installation (Windows) Updating MP Drivers in Network Environment (Windows)
Page 287: Failed To Mp Drivers Installation (Windows)
For Windows 8.1 / Windows 7: Select Control Panel > Programs and Features. 2. Check if there is "Canon XXX series MP Drivers" you want to install in list. "XXX" is the model name. 3. If you find MP Drivers for printer you want to install, uninstall it.
Page 288: Updating Mp Drivers In Network Environment (Windows)
Download the latest MP Drivers in advance. Download the latest MP Drivers for your model on the download page of the Canon website. After the download is completed, overwrite and install the new version of the MP Drivers according to the specified installation procedure.
Page 289: Errors And Messages
Errors and Messages When Error Occurred Message (Support Code) Appears...
Page 290: When Error Occurred
When Error Occurred If an error occurs in printing, for example, if the paper runs out or jams, a troubleshooting message appears automatically. For some errors, a support code (error number) is also displayed. Take the appropriate action described in the message. When a Support Code and a Message are displayed on the Computer Screen (Windows): When a Support Code and a Message are displayed on the Printer's...
Page 291 For details on how to resolve errors without Support Codes, see Message (Support Code) Appears.
Page 292: Message (Support Code) Appears
Message (Support Code) Appears This section describes some of the messages that may appear. Note • A support code (error number) is displayed for some errors. For details on errors that have support code, see List of Support Code for Error.
Page 293 Writing Error/Output Error/Communication Error (Windows) If the status bar is off and nothing is displayed on printer's LCD, make sure Check1 printer is plugged in and turn on. Make sure printer is properly connected to computer. Check2 If you are using a USB cable, make sure it is securely connected to both the printer and the computer. When the USB cable is securely plugged in, check the following: •...
Page 294 Other Error Messages (Windows) If an error message appears outside printer status monitor, check the Check following: • "Could not spool successfully due to insufficient disk space" Delete any unnecessary files to increase the amount of free space on the disk. •...
Page 295: List Of Support Code For Error
List of Support Code for Error Support code appears on the printer's LCD and your computer screen when errors occur. A "support code" is an error number, and appears along with an error message. When an error occurs, check the support code displayed on the printer's LCD and computer screen and take the appropriate action in response.
Page 296 • 6000 to 6ZZZ 6000 6001 6004 6500 6502 6800 6801 6830 6831 6832 6833 6900 6901 6902 6910 6911 6930 6931 6932 6933 6936 6937 6938 6940 6941 6942 6943 6944 6945 6946 6951 6A80 6A81 6D01 • 7000 to 7ZZZ 7500 7600 7700 7800 •...
Page 297: What To Do When Paper Is Jammed
What to Do When Paper Is Jammed If paper jams, remove it following the appropriate procedure as shown below. • If you can see the jammed paper at the paper output slot or the rear tray: 1300 • If you cannot see the jammed paper at the paper output slot or the rear tray: ◦...
Page 298 1300 Cause Paper is jammed when feeding paper from rear tray. What to Do Remove the jammed paper following the instructions below. 1. Slowly pull out paper, either from paper output slot or from rear tray, whichever is easier. Hold the paper with both hands, and pull it out slowly so as not to tear it. Note •...
Page 299 • We recommend using paper sizes other than A5 to print documents with photos or graphics. A5 paper may curl and jam as it leaves the printer. If the measures above do not solve the problem, contact your nearest Canon service center to request a repair.
Page 300 The printer resumes printing. Reprint the page you were printing if it was not printed properly due to the paper jam. If the measures above do not solve the problem, contact your nearest Canon service center to request a repair.
Page 301 The printer resumes printing. Reprint the page you were printing if it was not printed properly due to the paper jam. If the measures above do not solve the problem, contact your nearest Canon service center to request a repair.
Page 302 1313 Cause Paper is jammed as printer pulled in printed paper. What to Do Depending on where the paper is jammed, decide on the countermeasure. • If the paper is jammed at the paper output slot: 1300 • If the paper is jammed inside the printer: Paper Is Jammed inside Printer •...
Page 303: Paper Is Jammed Inside Printer
Paper Is Jammed inside Printer If the jammed paper tears and you cannot remove the paper from the paper output slot or the feed slot, or if the jammed paper remains inside the printer, remove the paper following the instructions below. Note •...
Page 304 4. Hold jammed paper firmly in both hands. If the paper is rolled up, pull out it. 5. Slowly pull out paper, so as not to tear it.
Page 305 6. Make sure all jammed paper is removed. If the paper tears when you pull out it, a bit of paper may remain in the printer. Check the following and remove any remaining paper. • Any paper left under the FINE cartridge holder? •...
Page 306 If the measures above do not solve the problem, contact your nearest Canon service center to request a repair.
Page 307: Removing Jammed Paper From Rear Side
Removing Jammed Paper from Rear Side Note • If paper becomes jammed during printing and you need to turn off the printer to remove it, press the printer's Stop button to stop the printing before you turn off the printer. 1.
Page 308 5. Slowly pull out paper. Note • Do not touch the inner parts of the printer. If you were not able to remove the paper in this step, detach the transport unit cover and remove the paper by following these steps. 1.
Page 309 2. Slowly pull out paper. Note • Do not touch the inner parts of the printer. 3. Make sure all jammed paper is removed. 4. If parts (A) are raised, lower them toward you. 5. Attach transport unit cover. Insert the transport unit cover slowly all the way into printer and take down the transport unit cover.
Page 310 6. Attach rear cover. Insert the projections of the right side of the rear cover into the printer, and then push the left side of the rear cover until it is closed completely.
Page 311 All jobs in the print queue are canceled. Redo the printing. Note • When reloading the paper, make sure you are using suitable paper and loading it correctly. If the measures above do not solve the problem, contact your nearest Canon service center to request a repair.
Page 312 1000 Cause Possible causes include the following. • There is no paper in the rear tray. • Paper is not loaded in the rear tray properly. What to Do Take the corresponding actions below. • Load paper in the rear tray. Loading Plain Paper / Photo Paper in Rear Tray •...
Page 313 1003 Cause Possible causes include the following. • There is no paper in the cassette. • Paper is not loaded in the cassette properly. What to Do Take the corresponding actions below. • Load paper in the cassette. Loading Plain Paper in Cassette Note •...
Page 314 Note • After loading the paper, align the paper guides of the cassette with the edges of the paper. Press the printer's OK button to cancel the error. Note • If you are printing a print head alignment sheet during printer setup, do not cancel printing.
Page 315 1200 Cause Scanning unit / cover is open. What to Do Close the scanning unit / cover and wait for a while. Do not forget to close it, such as after replacing FINE cartridges.
Page 316 FINE cartridge is not installed. What to Do Install the FINE cartridge. If the error is not resolved, the FINE cartridge may be damaged. Contact your nearest Canon service center to request a repair. Note • To cancel printing, press the printer's Stop button.
Page 317 If the error is not resolved, the FINE cartridge may be damaged. Replace the FINE cartridge with a new one. Replacing a FINE Cartridge If this still does not solve the problem, contact your nearest Canon service center to request a repair.
Page 318 1485 Cause Appropriate ink cartridge is not installed. What to Do Printing cannot be executed because the ink cartridge is not compatible with this printer. Install the appropriate ink cartridge. If you want to cancel printing, press the printer's Stop button.
Page 319 1650 Cause The ink cartridge cannot be recognized. What to Do Printing cannot be executed because the ink cartridge may not be installed properly or may not be compatible with this printer. Install the appropriate ink cartridge. If you want to cancel printing, press the printer's Stop button.
Page 320 1651 Cause The printer is still unable to communicate normally and cannot recognize the status of the ink cartridge. Printing function is deactivated until the printer can communicate normally. What to Do Press the printer's Stop button to cancel printing. Take action immediately to enable the printer to communicate normally, following the instructions below.
Page 321 1682 Cause FINE cartridge cannot be recognized. What to Do Replace the FINE cartridge. Replacing a FINE Cartridge If the error is not resolved, the FINE cartridge may be damaged. Contact your nearest Canon service center to request a repair.
Page 322 Canon recommends to use new genuine Canon cartridges in order to obtain optimum qualities. Please be advised that Canon shall not be liable for any malfunction or trouble caused by using a non- genuine Canon ink cartridge or by using non-genuine Canon ink.
Page 323 1687 Cause FINE cartridge is not installed properly. What to Do Open the scanning unit / cover to open the ink cartridge locking cover, and then remove the FINE cartridge. Make sure that the FINE cartridges are compatible with this printer. Then install the FINE cartridges again.
Page 324 1688 Cause The ink has run out. What to Do Replace the ink cartridge and close the scanning unit / cover. If printing is in progress and you want to continue printing, press the printer's Stop button for at least 5 seconds with the ink cartridge installed.
Page 325: Shipping Tape Etc. Are Still Attached (1890)
Shipping Tape etc. Are Still Attached (1890) Cause Shipping tape or protective material may still be attached to FINE cartridge holder. What to Do Open the scanning unit / cover and make sure that shipping tape and protective material have been removed from the FINE cartridge holder.
Page 326 2110 Cause Paper settings specified when printing/copying do not match the paper information for the cassette registered on the printer. Note • For the appropriate combination of the paper settings specified on the printer driver and the paper information registered on the printer, refer to the following. Paper Settings on the Printer Driver and the Printer (Media Type) (Windows) Paper Settings on the Printer Driver and the Printer (Paper Size) (Windows) •...
Page 327 Use the buttons to select the appropriate action and press the printer's OK button. Note • Depending on the settings, some of the options below may not be displayed. Print on set paper Select this option to print/copy on the loaded paper with the paper settings specified when printing/ copying.
Page 328 To change whether to display the misprint prevention message when printing/copying without using the printer driver: Feed settings To change whether to display the misprint prevention message when printing using the printer driver: Changing the Printer Operation Mode (Windows) Changing the Printer Operation Mode (macOS)
Page 329 2113 Cause Paper settings specified when printing/copying do not match either the rear tray or the cassette paper information registered on the printer. Note • For the appropriate combination of the paper settings specified on the printer driver and the paper information registered on the printer, refer to the following.
Page 330 Use the buttons to select the appropriate action and press the printer's OK button. Note • Depending on the settings, some of the options below may not be displayed. Print on set paper Select this option to print/copy on the loaded paper with the paper settings specified when printing/ copying.
Page 331 To change whether to display the misprint prevention message when printing/copying without using the printer driver: Feed settings To change whether to display the misprint prevention message when printing using the printer driver: Changing the Printer Operation Mode (Windows) Changing the Printer Operation Mode (macOS)
Page 332 2114 Cause Paper settings specified when printing/copying do not match the paper information for the rear tray registered on the printer. Note • For the appropriate combination of the paper settings specified on the printer driver and the paper information registered on the printer, refer to the following. Paper Settings on the Printer Driver and the Printer (Media Type) (Windows) Paper Settings on the Printer Driver and the Printer (Paper Size) (Windows) •...
Page 333 Use the buttons to select the appropriate action and press the printer's OK button. Note • Depending on the settings, some of the options below may not be displayed. Print on set paper Select this option to print/copy on the loaded paper with the paper settings specified when printing/ copying.
Page 334 To change whether to display the misprint prevention message when printing/copying without using the printer driver: Feed settings To change whether to display the misprint prevention message when printing using the printer driver: Changing the Printer Operation Mode (Windows) Changing the Printer Operation Mode (macOS)
Page 335 4103 Cause Cannot perform printing with current print settings. What to Do Press the printer's Stop button to cancel printing. Change the print settings specified when printing and retry printing.
Page 336 Printer error has occurred. What to Do Turn off the printer and unplug it. Plug in the printer again and turn it back on. If this does not solve the problem, contact your nearest Canon service center to request a repair.
Page 337 Printer error has occurred. What to Do Turn off the printer and unplug it. Plug in the printer again and turn it back on. If this does not solve the problem, contact your nearest Canon service center to request a repair.
Page 338 • Make sure the FINE cartridges are properly installed. Press down the ink cartridge locking cover until it clicks into place. Turn the printer back on. If this does not solve the problem, contact your nearest Canon service center to request a repair.
Page 339 What to Do Turn off the printer and unplug it. After a while, plug in the printer again and turn it back on. If this does not solve the problem, contact your nearest Canon service center to request a repair.
Page 340: 5B02
5B02 Cause Printer error has occurred. What to Do Contact your nearest Canon service center to request a repair. Note • In the case of warnings or errors caused by remaining ink levels, the printer cannot print or scan.
Page 341 What to Do When Paper Is Jammed Turn off the printer and unplug it. Plug in the printer again and turn it back on. If this does not solve the problem, contact your nearest Canon service center to request a repair.
Page 342: C000
Printer error has occurred. What to Do Turn off the printer and unplug it. Plug in the printer again and turn it back on. If this does not solve the problem, contact your nearest Canon service center to request a repair.

This manual is also suitable for:

Ts6420a

Canon TS6400 Series Online Manual

Quick Links

Related Manuals for Canon TS6400 Series

Summary of Contents for Canon TS6400 Series