Torque Instructions
To ensure proper sealing, torque fasteners using the
following procedure.
NOTE: Always completely torque fluid covers before
torquing manifolds.
1. Start all fasteners a few turns.
Torque Sequence
For proper installation, always follow the torque sequence whenever instructed to torque fasteners.
Fluid Covers
Torque to
190–220 in-lb (21–25 N•m)
3A8693B
2. Follow the torque sequence to turn down each
fastener until the fastener head contacts the
equipment.
3. Follow the torque sequence to turn each screw by
1/2 turn or less until at specified torque.
Manifolds
Torque to
190–220 in-lb (21–25 N•m)
Torque Instructions
Center Manifolds
Torque to
50–60 in-lb (5.65–6.78 N•m)
29