Table of Contents
Advertisement
Chapter 7
Data Transfer and Software Updates
|
78
Orion Star A320 Series Portable Meter User Manual
|
Export Data Settings
To transfer measurements to a computer or printer, turn the export data function on in the setup
menu and update export settings to match the external device settings, including the baud rate.
The default meter communication connection is RS232 and the meter will automatically detect
and adjust the connection setting when an active USB cable is connected with the meter.
1. In the measurement mode, press the setup key to access the main setup menu.
2. Press the p, q, t or u key to highlight Settings and press the f3 (select) key.
3. Press the p or q key to highlight Export Data and press the f3 (select) key.
4. Press the p or q key to highlight Printing and press the f3 (select) key. Press the p or
q key to highlight On and press the f3 (select) key.
5. Press the p or q key to highlight Data Format and press the f3 (select) key. Press the p
or q key to highlight Printer or PC (CSV) and press the f3 (select) key.
6. Press the p or q key to highlight Comm Config and press the f3 (select) key. Press the
p or q key to highlight 1200, 2400, 4800, 9600, 19200 or 38400 as the meter baud rate
and press the f3 (select) key.
7. Press the f1 (back) key to navigate out of the menu and press the measure (esc) key to
return to the measurement mode.
Data Transfer Examples
5 Point pH Calibration, CSV Format, HyperTerminal View:
pH Measurement, CSV Format, HyperTerminal View:
Thermo Scientific
Advertisement
Table of Contents
