Measurement Display Icons - Thermo Scientific Orion Star A320 Series Manual

Channel 1 main measurement mode
Channel 1 temperature and source
Channel 2 main measurement mode
Channel 2 temperature and source
Channel 3 main measurement mode
Channel 3 temperature and source
Thermo Scientific
Orion Star A329 pH/ISE/Conductivity/RDO/DO Meter Display
Display each channel separately, two channels simultaneously or all three channels
simultaneously using the f3 (channel) key.

Measurement Display Icons

Display Icon Description
Shown when the meter is running on AC power
Shown when the meter is running on battery power
Indicates when data is exported to a computer or printer
Indicates when a measurement is recorded in the data log
Shown when an alarm is set and the alarm is triggered
Indicates the RS232 port is selected for printer or computer interfacing
Indicates the USB port is selected for printer or computer interfacing
Displays the active temperature measurement and indicates the source as an
ATC temperature sensor (ATC) or manually entered temperature value (MAN)
Shown when the hold key is pressed and displayed measurements are frozen,
press the hold key a second time to release the hold function
Indicates a calibration has been successfully completed, flashes when the
calibration alarm is set and the alarm is triggered
Indicates the pH electrode condition as good (two bars), fair (one bar) or bad
(slash through it), based on the last saved calibration and electrode stability
Indicates the active measurement method number, M100 and M200 are the
default methods and indicate a password-protected method is not in use
Stability indicator will flash stabilizing while the measurement is changing and
show ready when the measurement is stable
When the read type is set to Auto-Read, the icon will flash while the reading is
stabilizing and remain solid when the reading is stable and locked on the display
Indicates the sample ID function is active, the operator assigned number is
shown to the right of the icon
Indicates the user ID function is active, the operator assigned name is shown to
the right of the icon
Date and time
Channel 1 main measurement value
Channel 1 main measurement units
Channel 2 main measurement value
Channel 2 main measurement units
Channel 3 main measurement value
Channel 3 main measurement units
Orion Star A320 Series Portable Meter User Manual
Chapter 2 Meter Basics
|
21
|