Festo VTSA-F-CB Manual page 77

Modification
2. Remove component.
Assembly
1. Replace damaged seals.
2. Insert the seal into the recess of the component.
3. Place component on the manifold sub-base.
4. Screw in the retaining screws.
5. Tighten retaining screws.
– Tightening torques è Tab. 55 Tightening torques.
Width Valve
18 mm VSVA-...-A2
26 mm VSVA-...-A1
42 mm VSVA-...-D1
52 mm VSVA-...-D2
Soft-start valve
Pilot air switching valve
Tab. 55: Tightening torques
1 or 2 solenoid coils can be actuated per valve position depending on the manifold sub-base è 4.4
Address assignment.
Festo — VTSA-F-CB — 2021-06a
Tightening torque of screw Spanner size for internal
1.0 Nm ± 10%
2.0 Nm ± 10%
3.0 Nm ± 20%
6.5 Nm ± 20%
3.0 Nm ± 20%
1.0 Nm ± 10%
hexagon
2.5
3
4
5
4
2.5
77