Security - Tenda I-WL-D305 User Manual

Enable UPnP: Check/uncheck to enable/disable the UPnP feature.
_________________________________________________________________________________________________
NOTE
UPnP is activated only when there is a live WAN service with NAT enabled.
_________________________________________________________________________________________________

4.2.5 Security

This section explains the following information:
• IP Filtering
• MAC Filtering
IP Filtering
Outgoing IP Filtering Setup
By default, all outgoing IP traffic from LAN is allowed, but some IP traffic can be BLOCKED by setting up filters.
Choose Add or Remove to configure outgoing IP filters.
Choose Add to enter the following screen:
87