Tenda I-WL-D305 User Manual page 89

To configure your router to make your local web server public:
Procedure
1. Click NAT > Virtual Server to enter it and then click the Add button.
2. Select Web Server (HTTP) that you wish to host on your network from the Select a Service drop-down list. The
port number (8080) used by this service will then be automatically populated.
- Or if you wish to define the service yourself, enter a descriptive name in the Custom Service, say My Web Server
(HTTP), and then manually enter the port number (8080) used by this service in the Internal Starting Port,
Internal Ending Port, External Starting Port and External Ending Port fields.
3. Select a protocol from the Protocol drop-down list. If you are unsure, select TCP/UDP.
4. In the Server IP Address field, enter the last digit of the IP address of your local computer that offers this service.
Here in this example, we enter 110.
5. Click .
Now you can view your configurations as seen in the screenshot below. Your friends on the Internet will then be able to
access the web server simply by entering "http://183.37.227.201:8080" in his browser.
_________________________________________________________________________________________________
NOTE
1. The "Internal Port End" cannot be modified directly. Normally, it is set to the same value as "External Port End".
However, if you modify "Internal Port Start", then "Internal Port End" will be set to the same value as "Internal Port
Start".
2. If the service or game you wish to host on your network is not included in the list, manually add it in the Custom
Service field and then add the port number used by it to the Internal Starting Port, Internal Ending Port, External
Starting Port and External Ending Port fields.
_________________________________________________________________________________________________
84