Tenda I-WL-D305 User Manual page 100


Available Routed WAN Interfaces: Displays the available routed WAN interfaces. Select a WAN interface and
click the button to add it to the Selected Default Gateway Interfaces box.

Apply/Save: Click to save and activate your settings.
Static Route
Static routes provide additional routing information to your router. Typically, you do not need to add static routes.
However, when there are several routers in the network, you may want to set up static routing. Static routing determines
the path of the data in your network. You can use this feature to allow users on different IP domains to access the Internet
via this device. It is not recommended to use this setting unless you are familiar with static routing. In most cases,
dynamic routing is recommended, because this feature allows the router to detect the physical changes of the network
layout automatically.
Click Add to enter the following screen:

IP Version: Select IP version.

Destination IP address/prefix length: Enter the destination IP address and prefix length of the final destination.

Interface: Select an interface from the drop-down list.

Gateway IP address: Enter the gateway IP address, which must be a router on the same LAN segment as the
95