Tenda I-WL-D305 User Manual page 20

4 antennas wireless n300 adsl2+ modem router

Table of Contents



Bridge

①

②

Select Auto or DSL link type and select Bridge connection type.

Configure the PVC, ISP and country settings manually. Click

③

you cannot locate this info. (Note that Auto PVC scan is not available for Bridge.)

④

Finish the wireless

Click OK.

When Bridge mode in DSL access is enabled, dial up from the local PC with the account provided by your ISP for

Internet service.

________________________________________________________________________________________________

NOTE

If your country and/or your ISP are not covered on the Home page, select "Other" from the country list and configure the

VPI and VCI value manually. If you cannot locate this information, refer to

provide it. For more information, see

_________________________________________________________________________________________________

setup. (Recommended)

To Set up the ATM interface

here

to check PVC value or consult your ISP if

Appendix 5 VPI/VCI List

and

To Set up WAN Service for ATM

or ask your ISP to

Interface.

Table of Contents

6932849430011