Table of Contents
Advertisement
Step 3: Select IP over Ethernet (IPoE). Edit the Enter Service Description field which is optional. Suggest you keep
the default. Select a network protocol you need: IPv6 Only. Click Next.
Step 4: Enter the WAN information provided by your ISP to configure the WAN IPv6 settings.
To obtain an IP address automatically:
Select Obtain an IPv6 address automatically.
Check Dhcp6c Prefix Delegation (IAPD).
If your ISP is using stateful DHCPv6, check Dhcp6c Address Assignment (IANA) also.
Click Next to go forwards.
43
Advertisement
Table of Contents
