Table of Contents
Advertisement
Specifications
Connections
Display
Sensoface
Status indicators
Notices
Keypad
Data logger
Recording
Communication
Profile
Usage
Diagnostics
Sensor data
(Memosens only)
Calibration data
Device self-test
Device data
Data retention
EMC
Emitted interference
Immunity to interference
Explosion protection
1x M8 socket, 4 pins, for Memosens lab cable
1 x M12 socket, 8 pins, for Memosens sensors
2 x 4-mm socket for separate temperature detector
1 x micro USB-B for operation without batteries
Be sure to observe the safety instructions when using the USB port.
LCD STN 7-segment display with 3 lines and icons
Status indication (friendly, neutral, sad)
For battery power level, logger
Hourglass
[
], [
], [
], [ ], [▲], [▼], [
With up to 5000 memory locations
Manual, interval- or event-controlled
USB 2.0
HID, driverless installation
Data exchange
Manufacturer, sensor type, serial number, operating time
Calibration date; zero and slope, or cell constant, resp.
Automatic memory test (FLASH, EEPROM, RAM)
Device type, software version, hardware version
Parameters, calibration data > 10 years
EN 61326-1 (General Requirements)
Class B (residential area)
Industry
EN 61326-2-3
(Particular Requirements for Transmitters)
CYM291
Global
Europe
pH
Oxy Cond
], [
], [
]
IECEx Ex ia IIC T4/T3 Ga
ATEX II 1 G Ex ia IIC T4/T3 Ga
49
Advertisement
Table of Contents
