Table of Contents
Advertisement
Overview
9
Value-Added Features
Memosens
The Liquiline To Go Ex CYM291 can communicate
with Memosens sensors. These digital sensors are
automatically identified and the meter switches to
the appropriate measurement method.
When a Memosens sensor is connected to the
meter, it is indicated by the logo shown on the
right. Furthermore, Memosens allows the storage
of calibration data, which will be available and
can still be used when the sensor is connected to
another Memosens-capable device.
Sensoface
Sensoface provides quick information on the
sensor condition. The three "smiley" faces as shown
on the right represent the sensor condition during
measurement and after a calibration. When the
condition deteriorates, an "INFO ..." message gives
a hint to the cause.
Programmed buffers
"Programmed buffers" is a very convenient method
for pH calibration with automatic buffer recogni-
tion. You only have to select the buffer set with the
buffers used. The buffers can then be used in any
order.
Advertisement
Table of Contents
